HP 22A Preset Mode User, Printer Adrs, Function Group SYSTEM Menu Map, Programming Codes See Also

Preset Mode User

Function Group SYSTEM

Menu Map 8

Description This softkey sets the standard starting configuration of the synthesizer when the (PRESET) key is pressed, as set by the user. You can define any starting conditions: Set up the synthesizer with the conditions you want, then select Preset Mode User . Now whenever you press (PRESET), the synthesizer returns to the configuration

you set. If preset mode user is set, when you press (PRESET), the synthesizer displays the following:

*** USER DEFINED PRESET RECALLED ***

Programming Codes

See Also

You can still do a factory preset. When the user preset mode is active, the softkey Factory Preset appears when you press

(PRESET). An asterisk next to the key label indicates that this feature is active.

SCPI:SYSTem:PRESet TYPE USER

Analyzer: NONE

[PRESET), Preset Mode Factory, Save User Preset “Changing the Preset Parameters,” in Chapter 1.

Printer Adrs

Function Group

Menu Map

Description

Programming Codes

SYSTEM

8

This softkey lets the synthesizer recognize a printer address between 0 and 30. The synthesizer can act as a controller for a printer during self-test, if the log-to-a-printer feature is initiated.

SCPI: DIAGnostic:INSTrument:PRINTer:ADDRess <num>

Analyzer: NONE

See Also Adrs Menu, Selftest (Full)

P-10 Operating and Programming Reference	HP 8360
User’s	Handbook