RADIO MODE
Switching to radio mode
If you are in CD, CD changer/Compact Drive MP3 or AUX mode,
➮press the FM TS button 5 for FM radio mode.
or
➮press the AM button ?for AM ra- dio mode.
Switching the RDS function on/ off
➮To use the RDS functions, press the RDS button 4.
The RDS function is active when RDS lights up in the display with a symbol.
Selecting the waveband / memory bank
This unit can receive programmes broadcast over the FM and AM wave- bands. There are three memory banks (FM1, FM2 and FMT) for the FM wave- band and two memory banks (AM and AMT) for the AM waveband.
Six stations can be stored in each mem- ory bank.
To switch between the FM memory banks,
➮briefly press the FM TS button 5 repeatedly until the required mem- ory bank appears in the display.
To switch between the AM memory banks,
➮briefly press the AM button ?re- peatedly until the required memory bank appears in the display.
Tuning into a station
There are various ways of tuning into a station.
Automatic seek tuning
➮Press the 
or 
button :.
The unit tunes into the next receivable station.
Tuning into stations manually
You can also tune into stations manual- ly.
➮Press the 
or 
button :.
Note:
You can only tune into stations manual- ly on the FM waveband if the RDS and PTY functions are deactivated.
Setting the sensitivity of station seek tuning
You can choose whether to only tune into stations with a strong reception or to also tune into those with a weak re- ception.
➮Press the MENU button 8.
➮Keep pressing the 
button : un- til “SENS”appears in the display.
➮Press the 
button :.
The display shows the currently set sen- sitivity level. “SENS 6”means that the tuner is set to the highest sensitivity setting. “SENS 1”is the lowest setting.
➮Set the required sensitivity using the 
or 
button :.
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS
11