RADIO MODE
➮Keep pressing the 
button : un- til “HICUT”appears in the display.
➮Press the 
or 
button : to ad- just HICUT.
“HICUT 0”means that no reduction will be made, “HICUT 3”means a maximum automatic reduction of the treble and interference level will be applied.
➮Press the MENU button 8 or OK
;.
Switching bandwidth during interference (SHARX)
The SHARX function allows you to largely avoid interference caused by neighbouring radio stations (FM only). Switch on the SHARX function if you experience a high radio station density.
Switching SHARX on/off
➮Press the MENU button 8.
➮Keep pressing the 
button : until “SHARX”appears in the dis- play.
➮Press the 
or 
button : to switch SHARX on/off.
“SHARX OFF”means automatic band- width switching is deactivated, “SHARX ON”means it is activated.
➮Press the MENU button 8 or OK
;.
Displaying scrolling text
Some radio stations use the RDS sig- nal to transmit advertising or other in- formation instead of their station name. These scrolling texts appear in the dis- play.
You can deactivate the “scrolling text” display for stations that you have stored on the station buttons.
➮Keep the RDS button 4 pressed until “NAME FIX”appears in the display.
➮To allow scrolling texts to appear in
the display again, keep the RDS button 4 pressed until “NAME VAR”appears in the display.
Note:
If you tune into an already stored sta- tion using a different means (e.g. using SCAN or by searching), the “scrolling texts”will be displayed.
Setting the display
When in radio mode, you have the op- tion of continuously displaying the time or continuously displaying the station name or frequency.
➮Keep the DIS 
button 7 pressed until the required display appears.
14