Blaupunkt CD52 7 642 285 310 External Audio Sources, External audio sources, Technical data

Page 26

EXTERNAL AUDIO SOURCES

TECHNICAL DATA

External audio sources

In addition to the CD changer, you can also connect up a different external au- dio source with a line output. Such sources can be, for example, portable CD players, minidisc players or MP3 players.

If there is no CD changer connected to your unit, two external audio sources can be hooked up.

The AUX output has to be switched on in the install menu.

To connect up an external audio source, you will need an adapter cable, obtain- able from any authorised Blaupunkt dealer.

Switching the AUX input on/off

➮Press the MENU button 8. “MENU”appears on the display.

➮Press the button : repeatedly until “AUX-IN-1 OFF”or “AUX-IN-1 ON”appears on the display.

For the second AUX input, a “2”will be displayed instead of a “1”. If a CD chang- er is connected, only input “2” will be available.

➮Press the or button : to switch AUX on or off.

➮Press the MENU button 8 or OK ; once you have completed the setting.

Note:

When the AUX input is switched on, it

can be selected using the SRC button @.

Technical data

Amplifier

Output power:	4 x 26 watts sine
	in accordance
	with DIN 45 324 at
	14.4V,
	4 x 50 watts max.
	power

Tuner

Frequency ranges:
FM	:	87.5 - 107,9 MHz
AM	:	530 - 1 710 kHz

FM transmission range:

20 - 16 000 Hz

CD

Transmission range:

15 - 20 000 Hz

Pre-amp output

4 channels:

4 V

Input sensitivity:

AUX 1 input	: 2 V / 6 kΩ
AUX 2 input	: 775 mV / 10 kΩ

Tel/Navi reception : 10 V / 560 Ω

Subject to changes!

26

Image 26

Contents Casablanca CD52 Open here English Français Español Português Controls Table of Contents Accessories Road safetyInstallation Blaupunkt GmbH Hotline Robert Bosch Str HildesheimRemoving the flip/release panel Flip/release panelTheft protection CDC a 02, CDC a 08 and IDC a Compact Drive MP3Attaching the flip/release panel FLIP/RELEASE Panel Switching ON/OFFSwitching on/off Replace the flip/release panel once moreSetting the switch-on volume Volume AdjustmentVolume adjustment Mute settingSetting the tuner Volume Adjustment Radio ModeRadio mode Automatic SoundTuning into a station Switching to radio modeSwitching the RDS function on/ off Setting the sensitivity of station seek tuningStoring stations automatically Travelstore Setting the scantimeStoring stations Listening to stored stationsFor example, the programme types can be Programme type PTYOptimising radio reception Setting the display Displaying scrolling textCD Mode CD ModeRepeating a track Repeat Random play MIXScanning tracks Scan Interrupting play PauseNaming CDs Displaying CD textStarting CD changer mode CD Mode CD Changer ModeCD changer mode Removing a CDRepeating individual tracks or whole CDs Repeat Scanning all tracks on all CDs ScanNaming CDs Clock Time Setting the timeSelecting the 12/24-hour clock mode Clock TimeTone and Volume Balance Tone and volume balance Equalizer Tone and Volume Balance Equalizer Setting the volume distribution front/rear fader Selecting sound presets Switching the equalizer on/offSetting the equalizer Selecting car presetsSetting the level indicator Setting aid for the equalizerExternal audio sources Technical dataExternal Audio Sources Blaupunkt GmbH