Storing stations

RADIO MODE

When you have finished making your changes,

➮press the MENU button 8 or OK

Storing stations manually

➮Select the required memory bank (FM1, FM2 or FMT) or the AM waveband.

➮Tune into the required station.

➮Press one of the station buttons 1 - 6 > for longer than two seconds to store the station to that button.

Storing stations automatically (Travelstore)

You can automatically store the six sta- tions with the strongest reception in the region. The stations are stored in the FMT memory bank in FM radio mode or in the AMT memory bank in AM radio mode.

Note:

Any stations that were previously stored in these memory banks are deleted in the process.

➮Keep the FM TS button 5 pressed for longer than two sec- onds.

The station storing procedure begins. “TRAVEL-STORE”appears in the dis- play. After the process is completed, the station stored in location 1 of the FMT or AMT memory bank will be played.

Listening to stored stations

➮Select the memory bank or wave- band.

➮Press the station button 1 - 6 > that corresponds to the station you want to listen to.

Scanning receivable stations (SCAN)

You can briefly play (scan) all the re- ceivable stations. You can set the scan- ning time (scantime) to between 5 and 30 seconds in the menu.

Starting SCAN

➮Keep the OK button ; pressed for longer than two seconds.

Scanning begins. “SCAN” appears briefly in the display followed by a flash- ing display of the current station name or frequency.

Stopping SCAN and continuing listening to a station

➮Press the OK button ;.

Scanning is stopped and the station that was tuned into last will remain active.

Setting the scantime

➮Press the MENU button 8.

➮Keep pressing the button : un- til “SCANTIME”appears in the dis- play.

➮Set the required scantime using the or buttons :.

➮When you have finished making

your changes, press the MENU button 8 or OK ;.