CD CHANGER MODE
➮Press the soft key 4with the display allocation “SCAN”
“SCAN” appears in the display alongside a flashing arrow symbol.
Stopping SCAN
To stop scanning,
➮press the soft key 4 with the display allocation “SCAN” once again.
The track last scanned then continues to be played.
Note:
You can set the scanning time as required. Please see the section “Setting the scanning time” in the “Radio mode” chapter.
Naming CDs
To make it easier for you to recognise your CDs, the car radio offers an individual name option for 99 CDs. The names should have a maximum of seven digits.
If you attempt to allocate more than 99 names, “FULL” will appear on the display.
Entering/altering CD names
➮Press the CDC button = when in CD changer mode.
The CD changer function menu is displayed.
➮Press the soft key 4with the display allocation “NAME”.
➮Select the CD you wish to name using
the 
/ 
buttons 7 or the soft keys 4“PREV” (previous) or “NEXT.
This brings you to the edit mode. If the CD you have selected is not yet known to the unit, seven underlines appear on the display and the current input position flashes.
➮Use the 
/ 
buttons 7 to choose your characters. Should a position re- main blank, you select the underline.
➮User the
or 
button 7to change the input position.
➮Press the OK button 5 to store the name.
Clearing a CD name
➮Press the MENU button 8 when in CD changer mode.
➮Press the soft key 4 with the display allocation “CDC”.
➮Select the CD whose name you wish to choose using the 
/ 
buttons 7 or the soft keys “PREV” (previous) or “NEXT”.
➮Hold down the soft key 4with the dis- play allocation “CD” until ”CD CLR” ap- pears on the display.
The CD name has now been cleared.
➮Press the OK button 5 to return to the
previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.
Clearing all CD names
➮Press the MENU button 8 while in CD changer mode.
➮Press the soft key 4 with the display allocation “CDC”.
➮Hold down the soft key 4with the dis- play allocation “ALL” until “MEMO CLR” appears on the display.
All CD names have now been cleared.
➮Press the OK button 5 to return to the
previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.
Programming favourite CD tracks
With the TPM function (Track Programme Memory), you can programme, store and play your favourite tracks on a particular CD. No matter what order the tracks are programmed, they will always be played back in ascending order. When playback of favourite tracks is activated, only the previously programmed
64