TIM
Playback of recorded traffic announcements
Four traffic announcements can be record- ed.
If no announcement has been recorded, “NO TIM” will appear on the display.
In order to listen to the recorded traffic an- nouncements
➮press the TIM button 6.
➮Press the soft key marked for the de- sired traffic announcement (“TIM1” to “TIM4”).
“TIM1” is the latest announcement and will be played back first. The other traffic an- nouncements then follow in ascending order. An arrow symbol flashes on the display along- side the traffic announcement currently be- ing played back.The name of the station which transmitted the traffic announcement appears on the display along with the time of record- ing.
After the last announcement has been played, the unit reverts to the previous mode.
In order to continue listening to the last active audio source without listening to all traffic announcements,
➮press the TIM button 6.
Interrupting TIM record standby
(for the time spent at the car wash)
Before you drive into the car wash,
➮switch the radio off.
If the display disappears immediately, TIM record standby is switched off and the remote antenna is pulled in.
➮You can now enter the car wash.
If, after switching off the radio, “TIM 2H” ap- pears briefly on the display, TIM record stand- by is activated.
In order to deactivate TIM record standby,
➮press the TIM button 6until “TIM OFF” appears briefly on the display.
TIM record standby is now deactivated and the antenna is pulled in (make sure to check this) and remains pulled in until the car radio is switched on again.
➮You can now drive into the car wash.
As soon as you switch on the radio, the TIM function is immediately reactivated and the remote antenna extended once more.
Note:
To prevent damage, do not switch the radio on again until you have driven out of the car wash.
58