THEFT PROTECTION | SWITCHING ON/OFF |
➮Press the soft key 4with the display allocation “LED” to switch between “LED ON” and “LED OFF”.
To leave the KeyCard menu,
➮press the OK button 5 to return to the
previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.
Displaying radio pass data
With the KeyCard supplied with your car ra- dio, you can have the data on your radio pass, such as name, type number (7 6 ...) and seri- al number displayed.
➮Press the MENU button 8.
➮Press the soft key 4with the display allocation “KC”.
➮Press the soft key 4with the display allocation “READ”.
The radio pass data now appear on the dis- play as main text.
To leave the KeyCard menu,
➮press the MENU button 8or OK 5.
Taking care of the KeyCard
Your KeyCard will function perfectly if the con- tacts are kept free of all foreign particles. Avoid direct skin contact.
Please clean the KeyCard contacts when necessary with some white spirit on a lint- free cloth.
Switching on/off
There are various ways of switching the car radio on and off.
Switching on/off using the button
2
➮To switch the unit on, press the button
2.
The car radio is now switched on.
➮To switch the unit off, hold the button 2 down for more than two seconds.
The car radio is now switched off.
Switching on/off using the ignition
If the car radio is correctly connected to the ignition and has not been switched off using the button 2, it is switched on/off simultane- ously with the ignition.
You can also switch on your car radio when the vehicle ignition is off.
➮To do so, press the button 2.
Note:
To protect the vehicle battery, the unit switch- es off automatically after one hour.
Switching on/off using the KeyCard
You can switch the car radio on or off by in- serting and removing the KeyCard if the unit was previously switched off using the button 2. You can read about inserting/removing the KeyCard in the chapter “Theft protection, KeyCard”.
44