CLOCK
CLOCK - Time
Setting the time
The time can be set automatically using the RDS signal. If no station using this function is available, the unit attempts to receive the
Setting the time automatically
To set the time automatically,
➮press the MENU button 8;
➮press the soft key 4 with the display allocation “CLK”;
➮press the soft key 4 with the display allocation “SYNC” repeatedly until “AU- TOSYNC” appears on the display.
Once “AUTOSYNC” has been selected and a station with the RDS time function (RDS- CT) or the
Or
➮Hold down the DIS button : for more than five seconds when in radio mode.
Note:
If it is not possible to receive a
If you do not wish to set the time automatical- ly (e.g. because you wish to set the clock to a different time zone),
➮select “SYNC OFF”.
Setting the time manually
To set the time manually,
➮press the MENU button 8;
➮press the soft key 4 with the display allocation “CLK”;
➮press the soft key 4 with the display allocation “SET”.
The time appears on the display. The hours flash and can now be set.
➮Set the hours using the / buttons
7.
➮Once the hours have been set, press the button 7.
The minutes now flash.
➮Set the minutes using the / buttons
7.
➮Press the OK button 5 to return to the
previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.
Selecting the 12/24-hour clock mode
➮Press the MENU button 8.
➮Press the soft key 4 with the display allocation “CLK”.
➮Press the soft key 4 with the display allocation “MODE”.
➮Press the buttons 7to switch be- tween the 12 and
➮Press the OK button 5 to return to the
previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.
66