VOLUME | AUDIO SETTINGS |
Setting the volume for the warning tone (beep)
If you hold down a button for longer than two seconds when using certain functions, e.g. storing a station on a station button, a warn- ing tone (beep) sounds. The volume of this beep is adjustable.
➮Press the MENU button 8.
➮Press the soft key 4with the display allocation “VAR”.
➮Press the soft key 4with the display allocation “BEEP”.
➮Adjust the volume using the 
and 
buttons.
If you wish to deactivate the beep,
➮press the
button 7.
“BEEP OFF” appears on the display.
➮Press the OK button 5to return to the
previous menu level or the MENU but- ton 8to leave the menu altogether. The settings are now stored.
Audio settings
Note:
You can adjust the bass, treble and loudness settings separately for each audio source.
Bass settings
➮Press the AUD button 9. “AUDIO 1” appears on the display.
➮Press the soft key 4 with the display allocation “BASS”.
➮Press the 
or 
button 7 to adjust the bass.
When the settings have been completed,
➮press the AUD button 9.
Treble settings
➮Press the AUD button 9. “AUDIO 1” appears on the display.
➮Press the soft key 4 with the display allocation “TREB”.
➮Press the 
or 
button 7 to adjust the treble.
When the settings have been completed,
➮press the AUD button 9.
Loudness
Loudness means the bass levels are aurally compensated, i.e. they are increased at low- er volume levels.
➮Press the AUD button 9. “AUDIO 1” appears on the display.
➮Press the soft key 4 with the display allocation “LOUD”.
➮Press the 
or 
button 7 to adjust the loudness.
ENGLISH
47