Blaupunkt RCM 168 Radio operation with RDS Radio Data System, Selecting a waveband

Page 12

Radio operation with RDS (Radio Data System)

DEUTSCH

The Radio Data System enhances your enjoyment when you listen to FM radio sta- tions.

More and more radio stations now broad- cast RDS information along with their re- gular programming.

As soon as a programme has been identi- fied, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany).

When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desi- red station quickly.

But RDS also offers you further advantages:

While searching for the strongest recepti- on signal, the radio may switch to mute briefly.

If "SEARCH" appears in the display when the radio is switched on or one of the stored frequencies recalled, the unit is already automatically searching for an alternative frequency.

"SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has run through completely.

If the reception quality of the programme selected deteriorates beyond a certain point:

Tune into another station.

If you leave the service area of the regio- nal programme you are tuned into, or if you would like to take full advantage of RDS service, switch to "REG OFF" in the DSC mode.

Selecting a waveband

The following wavebands are available:

UKW (FM)

87,5

108 MHz,

MW (AM)

531

1602 kHz and

LW

153

279 kHz

Press the BA/TS button to select the desired waveband.

Station tuning

Automatic seek tuning /

ENGLISH

ÇFRAN AIS

ITALIANO NEDERLANDS

AF - Alternative frequency

The AF (Alternative Frequency) function makes sure that the radio always tunes into the strongest frequency for the currently sel- ected programme automatically. If this function is activated, "AF" will appear in the display.

To switch AF on/off,

press the AF·TA button for a longer time.

REG - regional programme

Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers pro- grammes with different contents in the nor- thern German states of Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day.

If you are listening to a particular regional programme and wish to continue doing so, select "REG ON" in the DSC mode.

Press /, the car radio will automati- cally search for the next station.

If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.

SVENSKA

ÑESPA OL

PORTUGU SÊ

35

Image 12
Contents Saint Tropez RCM Ravenna RCM Las Vegas DJ Remote control RC 08 optional Display Display fieldContents Quick reference RELAUD DSC-MODE PTY@ AUDPreset Scan Preset buttons 1 toPTY Scan = DIS Clock displayRPT MIXList ? BA/TSImportant notes Accessories Release panelTheft protection Detaching the release panelSelecting the operating mode Fixing the release panelStation tuning Radio operation with RDS Radio Data SystemSelecting a waveband AF Alternative frequencySwitching between the memory banks FM Scrolling through the broadcast networks FM onlyStoring stations Scanning stored stations with Preset Scan Selecting the automatic tuning sensitivityRecalling stored stations Scanning stations with Radio ScanSwitching PTY ON/OFF Programme typesChecking the programme type of the station Displaying the selected programme typeStoring programme types Scanning stations with PTY ScanPTY priority Automatic seek tuning start Switching the warning beep offTraffic programme station reception with RDS-EON Traffic announcement priority on/offCassette deck operation CD changer operation Selecting a track Naming CDsDeleting CD names Deleting one CD nameDeleting all CD names Setting the clock Setting the TimerClock DSC programming Specifications