•press 
/
to start the seek tuning function.
If the radio is unable to find a station offe- ring the selected programme type, the dis- play will show "NO PTY" and a beep tone will be emitted. The radio will select the sta- tion which was tuned into before seek tu- ning was activated.
Storing programme types
Each of the preset buttons
If desired, you can also replace these with other available programme types.
To do so, make sure that "PTY" lights up in the display.
•If necessary, press the PTY button to switch on the function.
•Select a programme type using buttons <<>> and
•hold down the desired preset button (1-
6) until you hear a beep.
Now the selected programme type can be recalled by pressing this preset as long as "PTY" lights up in the display.
Scanning stations with PTY SCAN
Important: "PTY" must appear in the dis- play.
• Press SCA.
All of the stations in your current reception area offering the selected programme type will be scanned.
To switch off
•Press SCA again.
PTY priority
Situation:
PTY is switched on and lights up in the dis- play.
No station offering the selected program- me type can be found currently in your re- ception range (with seek tuning or scan).
The set will switch back to the station pre- viously tuned into.
As soon as it is possible to receive a pro- gramme in the broadcast network with the PTY selected, the radio will switch over to the corresponding station for the duration of the programme.
Example:
-Station playing: NDR3.
-"PTY" lights up in the display.
-Programme type "POP" selected.
-Seek tuning is started.
-No station with
-The display shows "NO PTY" and
-automatically switches back to NDR3.
-NDR2 airs a
-The radio will switch to the linked stati- on NDR2 for the duration of the "POP" programme.
During cassette or CD operation, the set will also switch to the radio programme if the selected PTY becomes available within the broadcast network.
After the PTY programme has ended the system will switch back to the previous mode (radio, cassette or CD).
Note:
As already mentioned, these functions are only supported by a limited number of RDS stations at the present time.
ENGLISH DEUTSCH
ÇFRAN AIS
ITALIANO NEDERLANDS SVENSKA
ÑESPA OL
PORTUGU SÊ
39