Radio mode
Press SCA briefly.
All of the FM stations within reception range will be scanned. "SCAN" will appear in the display, alternating with the radio station currently being scan- ned (flashing).
Preset Scan
Press SCA for approx. 2 seconds until you hear a beep. "PS Scan" will ap- pear in the display, followed by the station symbol (flashing).
The stations stored on the station pre- set buttons and within reception range will be scanned.
To stop Scan / Preset Scan: Press SCA again.
PTY Scan
PTY Scan cannot be started unless PTY is switched on ("PTY" will light up in the display.)
The radio stations for the program type selected will be scanned. "PTY SCAN" will appear in the dis- play, alternating with radio station currently being scanned.
To stop Scan / PTY Scan: Press SCA again.
Cassette mode
Press SCA briefly.
All of the titles on the cassette will be scanned.
To stop Scan: Press SCA again
Changer mode
Press SCA briefly.
All of the CD tracks will be scanned. "SCAN" will appear in the display. To stop CD scan:
Press SCA again.
=
DIS - Clock display
Radio mode
Press this button briefly and the time will appear in the display for a short while.
Changer mode
Press this button to switch the display between the CD Name, CD number, playback time indication and clock.
Cassette mode
Press this button to switch the display between the time and the cassette track (TAPE 1/TAPE 2).
>Preset buttons 1 to 6
Radio mode
You can store six stations in each FM memory bank (1, 2, and "T").
On MW and LW you can also store six stations each.
Store station - Hold down a preset button in radio mode until you hear a beep.
Recall station - Select a waveband and the memory bank on FM as well; press the
corresponding preset button briefly.
Cassette mode
1/MTL -
Selects between chrome or iron oxide tape types.
Press 1/MTL.
2/
- Dolby
Reduces excess noise when playing tapes recorded using the DOLBY B system.
3/
- Pause
Interrupts tape playback. "PAUSE" will appear in the display.
Press this button once again to resu- me playback.
30