Blaupunkt RCM 168 operating instructions Selecting a track, Naming CDs

Page 20

Selecting a track

Up: Press briefly.

CUE - fast advance (audible): Hold button down.

Down: Press two or more times briefly.

To re-start a title: Press briefly.

REVIEW - fast reverse (audible): Hold

button down.

Press the button repeatedly to skip several tracks.

The number of the selected track will ap- pear beside "T" (track).

RPT

CD tracks can be played repeatedly.

The following options are available:

–Repeat the current track ("REPEAT-T")

or

–Repeat the CD, i.e. all tracks on the cur- rent disc ("REPEAT-D").

"RPT" will appear in display field 3 as long as RPT is active. "REPEAT-T" will light up

briefly in display field 2 when you activate this function and each time the track chan- ges. "REPEAT-D" will show when a CD is repeated.

Switch REPEAT-T on:

•Press 4/RPT briefly. Switch REPEAT-D on:

•Hold 4/RPT down for longer.

To stop repeat functions, press 4/RPT.

MIX

You can have the CD tracks played in ran- dom order.

The following options are available:

–Mix all tracks of one CD ("MIX-CD")

or

–Mix all tracks of all CDs ("MIX-ALL").

"MIX" will appear in display field 3 as long as the MIX function is active.

"MIX-CD" or "MIX-ALL" will light up briefly in display field 2 when you activate this function

and each time the track changes.

Switch MIX-CD on:

•Press 5/MIX briefly. Switch MIX-ALL on:

•Hold 5/MIX down for longer.

To stop mix functions, press 5/MIX again.

LIST

In DSC mode (Direct Software Control) it is possible to allocate names to your CDs. In LIST mode you can view this list without interrupting CD playback. If you have not named the CDs, the display will list the num- bers only. Press <<>> to select a CD from the list. This CD will then begin to play.

SCAN

Use this function to scan all of the CD tracks.

To start the Scan function:

•Press SCA, "SCAN" will appear in the display.

All tracks on the CD will be scanned one after the other in ascending order.

To stop the Scan function:

• Press SCA briefly.

The track currently scanned will continue to play.

Naming CDs

To allow you to identify your CDs more quickly, you can use DSC programming to enter individual names for up to 99 CDs. The names can have up to 7 characters.

If you attempt to enter more than 99 na- mes, "FULL" will appear in the display. The CD name has priority over the CD number for display purposes.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

43

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Saint Tropez RCM Ravenna RCM Las Vegas DJ Remote control RC 08 optional Display Display fieldContents Quick reference RELAUD DSC-MODE PTY@ AUDPreset Scan Preset buttons 1 toPTY Scan = DIS Clock displayRPT MIXList ? BA/TSImportant notes Accessories Release panelTheft protection Detaching the release panelSelecting the operating mode Fixing the release panelStation tuning Radio operation with RDS Radio Data SystemSelecting a waveband AF Alternative frequencyStoring stations Switching between the memory banks FMScrolling through the broadcast networks FM only Scanning stored stations with Preset Scan Selecting the automatic tuning sensitivityRecalling stored stations Scanning stations with Radio ScanSwitching PTY ON/OFF Programme typesChecking the programme type of the station Displaying the selected programme typePTY priority Storing programme typesScanning stations with PTY Scan Automatic seek tuning start Switching the warning beep offTraffic programme station reception with RDS-EON Traffic announcement priority on/offCassette deck operation CD changer operation Selecting a track Naming CDsDeleting all CD names Deleting CD namesDeleting one CD name Clock Setting the clockSetting the Timer DSC programming Specifications
Top Page Image Contents