Cassette deck operation

Cassette playback

Insert the tape into the slot with the open side showing to the right. Press SRC to select the tape deck mode. "CASSETTE" will appear in the display. The tape will play in the direction "TAPE 1".

If a tape is already inside, press SCR to select "CASSETTE" mode. The tape will play in the direction last selected.

Reversing the tape

Press to change the tape direction du- ring cassette playback from TAPE1 to TAPE2 or

vice versa:

At the end of the tape, the unit will automa- tically switch to the opposite side.

Skipping cassette titles

CPS stands for Cassette Program Search and allows you to skip over songs on the tape.

The titles must, however, be separately by at least 3 seconds of blank tape.

During tape playback press either or on the rocker switch to activate the CPS mode. "CPS FF" or "CPS FR" will appear in the display. Press the button / repea- tedly to skip the corresponding number of titles in either direction.

The number of titles to be skipped will ap- pear in the display and count down until the title selected has been reached.

Press the button indicating the opposite di- rection or << >> to stop the function.

Repeat song titles

During tape playback press 4/RPT. "RPT" will light up in display field 3; "REPEAT-T" will appear briefly in display field 2. While the tape is rewinding, "REWIND-T" will ap- pear in the display. The title playing will re- peat until you press 4/RPT again. "RPT" will disappear from the display.

Playback will now continue normally.

Scan

To scan all of the songs on a tape, press SCA. "SCAN" will appear in the display. All of the titles on the tape in the tape deck will be scanned briefly one after the other. Press SCA again to switch the SCAN function off. The title currently playing will continue to play.

Fast winding

Use the rocker switch to fast forward or rewind the tape during cassette operation:

>>forward

<< rewind.

"FORWARD" or "REWIND" will light up in the display.

Press the button indicating the opposite di- rection or / to stop the function.

If you have activated "Radio Monitor ON", the unit will play the radio station last sel- ected while the tape is winding. You can alter the Radio Monitor setting in DSC mode.

Tape type selection

If you are playing METAL or CrO2 casset- tes, press MTL. "MTL" will then light up in display field 1.

DOLBY B NR (Noise reduction)*

Cassettes which have been recorded with the DOLBY B NR system exhibit consi- derably less tape noise and higher dyna- mics. To play cassettes recorded using this system, press .

will light up in display field 3

Cassette eject

Press to eject the cassette.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ