Blaupunkt DAB47 Tuning into a station, Setting the sensitivity of station seek tuning

Radio mode

Selecting the waveband / memory bank

This device can receive programmes broad- cast over the FM frequency range as well as the MW and LW (AM) wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands.

Five stations can be stored in each memory bank.

To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands,

￿briefly press the BND•TS button 4.

Tuning into a station

There are various ways of tuning into a sta- tion.

Automatic station seek tuning

￿Press the or button 6.

The radio tunes into the next receivable sta- tion.

Tuning into stations manually

You can also tune into stations manually.

Note:

You can only tune into stations manu- ally if the RDS function is deactivated.

￿Press the or button 6.

Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called “broadcasting net-
work”.	ENGLISH
Note:
The RDS function must be activated be-
fore you can use this feature.
￿ Press the or button 6 to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.

Setting the sensitivity of station seek tuning

You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into those with a weak reception.

￿Press the MENU•OK button 7. “TUNER MENU” appears on the display.

￿Press the MENU•OK button 7to dis- play the tuner menu.

￿ Press the or button 6repeatedly until “SENS” appears on the display.

The display shows the currently set sensitiv- ity level. “SENS HI3” means that the tuner is set to the highest sensitivity setting. “SENS LO1” means it is set to the lowest sensitiv- ity setting.

77