Blaupunkt DAB47 Storing stations, Listening to stored stations, Scanning receivable stations Scan

Radio mode

￿Set the sensitivity level that you want

using the buttons 6.

When you have finished making your chang- es,

￿press the MENU•OK button 7 and then the DIS•ESC button 5to exit the menu.

Note:

You can set different sensitivity levels for FM and MW or LW (AM).

Storing stations

Storing stations manually

￿Select the memory bank that you want (FM1, FM2, FMT) or one of the wave- bands (MW or LW).

￿Tune into the station that you want.

Press and hold down one of the station buttons 1 - 5 :, for longer than two seconds to assign the station to that button.

Storing stations automatically (Travelstore)

You can automatically store the five sta- tions offering the strongest reception in the region (only FM). The stations are stored in the FMT memory bank.

Note:

Any stations that were previously stored in this memory bank are deleted in the process.

￿Press and hold down the BND•TS but- ton 4for longer than two seconds.

The storing procedure begins.

“TRAVEL STORE PLEASE WAIT” appears on the display. After the process has com- pleted, the radio will play the station that is stored in memory location 1 of the FMT memory bank.

Listening to stored stations

￿Select the memory bank or waveband.

￿Press the station button 1 - 5 :of the desired station.

Scanning receivable stations (SCAN)

You can use the scan function to play all the receivable stations briefly. You can set the scanning time from 5 to 30 seconds in the menu in increments of five seconds.

Starting SCAN

￿Press and hold down the MENU•OK button 7 for longer than two sec- onds.

Scanning begins. “SCAN” appears briefly on the display followed by a display of the current station name or frequency.

Cancelling SCAN and continuing listening to a station

￿Press the MENU•OK button 7.

Scanning stops and the radio continues playing the station that it tuned into last.

78