Tape operation

Inserting a tape

•Turn on the set.

•Insert a tape.

Eject		Insert cassette with side A or 1
cassette		facing up, the open side facing
		to the right
		to the right

The tape will be played in the direction used last.

If TR1-PLAY is displayed, this means that track 1 or A of the tape is played.

Ejecting a tape

•Press .

The cassette will be ejected.

Fast winding

Fast forward

•Press FF (fast forward).

At the end of the tape, the set will switch to the other track and start play- ing it.

To stop fast forward:

•press FR.

Fast rewind

•Press FR (fast rewind).

When the tape has been completely rewound, the set will start playing the same track again.

To stop fast rewind:

•press FF.

Switch-over to the other track

Press simultaneously

TR1-PLAY or TR2-PLAY on the display

Fast	Fast
rewind;	forward;
To stop:	To stop:
press FF	press FR

Autoreverse

If, while a tape is playing, you wish to switch to the other track of that tape:

•press FR and FF simultaneously.

At the end of the tape, the set will automati- cally switch to the other track. The display will show TR1-PLAY for track 1 or A and TR2- PLAY for track 2 or B.

Note:

If there is too much tension on the tape during playback, the set may switch to the other track by itself. In this case check the condition of the tape. Sometimes it helps to rewind the cassette tape completely.

Tape equalisation switch for

MTL

The equalisation is done automatically.