Blaupunkt RCM 104 Enter/display CD names, Deleting CD names, Survey of DSC default settings

Enter/display CD names

You can allocate names for up to 99 CDs. When playing a CD, the display will then give you entered name, e.g. VIVALDI.

Precondition: NAME must be set under DSC - CD DISP.

Entering a name:

Be sure that at least 1 CD is inserted in the CD magazine.

•Press SRC to change to CDC

•Press DSC

•Press the rocker switch / until CD NAME is displayed.

•Press -dB

The first character position flashes.

•Select a character using the rocker switch /.

The display will give you one after the other the capital letters (A-Z), the special charac- ters and the numbers 0-9.

•Use the rocker switch << >> to change to the next character position and sel- ect a character.

Each name may have up to seven charac- ters.

To complete the entry:

•Press -dB. The entry is stored and you can now select another DSC function using the rocker switch /.

Alternatively:

•Press DSC. The entry is stored and you quit the DSC menu.

Storing the entry/selecting the next CD:

•Press -dBand select the next CD using << >>.

•Press -dBand enter a name.

Storing a new name deletes the previous name (overwrite).

Deleting CD names

If you try to store more than 99 CD names, “FULL” will be shown in the display. In the DSC mode, you can delete the name of one or more CDs to free memory space.

The function CDC-UPDATE can be used to confirm all CDs, which names you wish to maintain. All the other names will be deleted.

•Press DSC.

•Insert a magazine with the CDs, which names you wish to maintain.

•Press / until “CDC UPD” is display- ed.

•Press << >> and “LOAD CD” is display- ed.

After having confirmed all CDs of this maga- zine, “NEXT MAG” appears in the display.

•Press EJECT on the CD changer and insert the next magazine.

Repeat these steps for all CDs, which names you wish to maintain.

•To finalize your selection, press -dBfor about 2 sec. until “UP DATING” ap- pears in the display. The updating pro- cess is completed, when the display shows “READY”.

The names of all CDs you have inserted remain stored in the memory. For all the other CDs, the names are deleted.

You can interrupt this process by pressing DSC.

Survey of DSC default settings

DEUTSCH

PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS