![](/images/new-backgrounds/1249463/24946329x1.webp)
Radio mode
receive the stations, use the Scan or Travelstore function.
Setting the sensitivity of station seek tuning
You can choose whether the radio should only tune into stations providing good re- ception or whether it can also tune into those with a weak reception.
Press the MENU¥OK button 5.
Press the or
button 4repeatedly until "SENS HI" or "SENS LO" appears on the display.
The display shows the currently set sensi- tivity level. "SENS HI6" indicates the high- est sensitivity, "SENS LO1" the lowest.
Set the desired sensitivity with the or
button 4.
When you have finished making your chang- es,
press the ESCAPE button <.
Note:
The device stores the sensitivity value set in the respective FM and AM wave- band.
Storing stations
Storing stations manually
Select the desired memory bank (FM1, FM2, FMT) or one of the wavebands (MW or LW).
Tune into the desired station.
Press and hold down one of the station buttons 1 - 5 9 for longer than two seconds to assign the station to that button.
Storing stations automatically (Travelstore)
You can automatically store the five sta- tions offering the strongest reception in the region (FM only). The stations are stored in
Note: | ENGLISH |
the FMT memory bank. |
|
Any stations that were previously stored in this memory bank are deleted in the process.
Press and hold down the BND button =for longer than 2 seconds.
The storing procedure begins. "FM TSTORE" appears on the display. After the process has completed, the radio will play the sta- tion that is stored in memory location 1 of the FMT memory bank.
Note:
If the priority for traffic information is active (the display shows the traffic jam symbol), only traffic information stations are stored.
Listening to stored stations
Select the memory bank or waveband.
Press one of the station buttons 1 - 5
9.
The stored station is played if it can be re- ceived.
Scanning receivable stations (SCAN)
You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds.
47