Blaupunkt RCM 85 Manual tuning, Automatic tuning, Scrolling through the broad- casting network

Page 10
You can shift between the memory banks I, II, and T to store and recall preset stations. The selected memory bank is indicated in the display.
• Press FM or TS until the desired me-
mory bank lights up in the display (press repeatedly if necessary).
If “AF” does not light up,
• press AF.
With this, the requirements for selecting sta- tions with << >> are fulfilled.
Changing the memory bank

If you leave the service area of the regional programme tuned into, or if you would like to take advantage of the full RDS service, switch to “REG OFF”.

Press the AF button for approximately 2 seconds until “REG OFF” appears.

When active, “REG ON” will be briefly dis- played each time the radio is switched on.

Manual tuning << >>

(prerequisite: AF is switched off!)

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rocker switch pressed down, the frequency scan is speeded up.

Automatic tuning /

Press /; the car radio will automati- cally search for the next station.

When keeping the upper or lower part / of the rocker switch depressed, seek tuning will speed up in upwards or downwards direc- tion.

Automatic tuning

Up

Down

/ Up/down in short intervals (“AF” must be switched off)

/ To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Scrolling through the broad- casting network

You can use the << >> buttons to tune in

 

stations of your reception area.

 

If several programmes of one broadcasting

 

network can be received, you can scroll Storing stations

through them in forwards direction pressing

On FM, you can store six stations on the

>>, or backwards using the << button, e.g.

preset buttons 1 to 6 for each of the memory

NDR 1, 2, 3, 4, N-JOY (North German broad-

banks I, II and T.

caster).

• Select the desired memory bank.

For this it is necessary that the stations have

 

been received at least once and that “AF” has • Tune in a station with the rocker switch

been activated before (lights up in the dis-

(either automatically or manually).

play).

• Press the desired preset button until

For this purpose, you may start Travelstore

the radio resumes play after the muting

seek operation:

(takes approximately 2 seconds, confir-

• Press FM for 2 seconds; the system

med by beep).

starts to run through the frequency

Now the station has been stored.

band.

The activated preset button is indicated in the

 

display.

26

Image 10
Contents Wiesbaden RCM Deutsch Contents Short instructions On Off VolumeAUD/GEO AUD Display MTL Dolby B-NRCassette removal Press Cassette loading slot Radio operation= SC/MIX ? 1, 2, 3, 4, 5, 6 preset buttonsFast winding/PROG button SRC SourceInstallation/Connection PrecautionsTraffic safety Important notesRemoving the KeyCard KeyCard theft-protection systemPutting the unit into operation Defining a second KeyCard/ Replacing a KeyCardOptical indication for extra Radio operation with RDS Radio Data SystemREG regional programme SecurityAutomatic tuning Manual tuningAutomatic tuning Scrolling through the broad- casting networkTivity Sampling stored stations briefly Preset ScanSelecting the seek tuning sensi Scanning stations withReceiving traffic programme stations with RDS-EON Switching from stereo to monoSwitching the warning beep off Traffic announcement priorityInserting a tape Automatic seek tuning startTape operation Removing a tapeDolby B-NR* Tape equalisation with B/MTL Switching the audio sourceProg selector Skipping/repeating titles with CPSDIS DSC programmingTape care Local loLED code Overview of the DSC factory settingsBeep LoudSelecting a disc/track using the rocker switch Switching to changer operationCD changer control optional Amplifier SpecificationsAppendix FM wavebandBlaupunkt-Werke GmbH
Related manuals
Manual 20 pages 5.11 Kb Manual 19 pages 10.96 Kb