PROG selector
(To change the tape direction during cassette playback)
• Press FR and FF simultaneously.
At the end of a tape side, the mechanism changes directions automatically to play the other side (Autoreverse). The display shows
PLAY” for track 2 or B.• Press B/MTL repeatedly until the desi- red setting appears in the display.
To switch the function on/off:
•Press CPS.
“CPS ON” or “CPS OFF” will light up in the display for approximately 2 seconds.
With “CPS ON”:
Fully depress the FF button -
The tape is fast forwarded to the next title.
Notice:
If there is too much tension on the tape during playback, the set may switch over by itself before having reached the end of the tape side. In this case check the condition of the cassette tape. Sometimes it helps to rewind it completely.
Dolby B-NR* and
tape equalisation with B/MTL
Dolby B-NR*
With this unit you can play back tapes recor- ded with
If Dolby
*Noise Reduction system manufactured under license from Dolby Laboratories Licensing Corporation. “Dol-
The system enables the following settings:
MTL tape | The display shows | |
with Dolby | MTL | B |
without Dolby | MTL | – |
Normal tape |
|
|
with Dolby | – | B |
without Dolby | – | – |
Skipping/repeating titles with CPS
CPS stands for Cassette Program Search. This function allows you to skip a cassette title or listen to it once again.
Fully depress the FR button -
The tape is rewound to the beginning of the current title, provided that it has already been played for more than 8 seconds. Otherwise the tape will be rewound to the beginning of the previous title.
Switching the audio source
with SRC (Source)
Using this function you can switch between radio, tape and CD changer (optional) opera- tion or playback of any other connected de- vice.
To switch over:
•Press the SRC button.
30