Overview of the DSC factory settings, Beep, Loud

BEEP	Confirmation tone for all
	functions which require a
	button to be pressed for
	more than 2 seconds.
	The volume can be adju-
	sted from between 0 to 9.
	(0 = off)
	Each alteration of this va-
	lue is confirmed by a beep
	tone of the corresponding
	volume.
LED (code)	You can adjust the LED C
	to flash for extra anti-theft
	protection.
	LED 1 -	LED always flas-
		hes when the unit
		has been swit-
		ched off via the
		ignition and the
		KeyCard remo-
		ved.
	LED 0 -	No flashing.

LOUD	Loudness - When listening
	at a low level, the Loud-
	ness function creates a
	more natural sound by
	boosting the low frequency
	range.
	LOUD 1 - Low boost
	LOUD 6 - Max. boost
RM	(Radio Monitor)
	With RM-ON, the unit will
	automatically switch to the
	tuner whenever the casset-
	te is fast winding.
	RM-OFF - The function is
	switched off.

To quit the DSC programming mode and store the adjustment:

•Press DSC.

If the setting remains unchanged within 8 seconds, the system will automatically store the last adjustment. The display will switch back to the previous condition.

Overview of the DSC factory settings

LOCAL	: 1
DIS	: 1
TIME	: OFF
TA VOL	: 4

BEEP : 3

LED (Code) : 1

LOUD : 4

RM : OFF

BEEP

LED (code)

LOUD

Overview of the DSC factory settings