Blaupunkt RCM 85 Radio operation with RDS Radio Data System, REG regional programme, Security

Page 9

Radio operation with RDS (Radio Data System)

The display will switch to “CHANGE”.

The Radio Data System offers you more

If “SEARCH” appears in the display when

• Press the KeyCard in, which releases

convenience when listening to FM radio sta-

switching on the radio or recalling one of the

the card and puts it in the proper positi-

tions.

stored frequencies, the unit is automatically

on for being removed.

More and more radio stations have begun to

searching for an alternative frequency.

• Remove the first KeyCard and insert

broadcast RDS information alongside their

“SEARCH” will disappear from the display

programmes.

when the alternative frequency has been

the new one while “CHANGE” is still

As soon as a programme has been identified,

found or after the frequency band has been

being displayed.

the station name including a regional identi-

run through completely.

Now you can also use the new KeyCard for

fier, if applicable, will appear in the display,

If the reception quality of the selected pro-

operating your unit.

for example, NDR1 NDS (regional program-

gramme becomes too bad:

A maximum of two cards can be used per set.

me in Lower Saxony, Germany).

• Tune into another station.

When trying to „define“ a third one, the

When RDS is activated, the station buttons

 

system will automatically delete the access

become programme buttons. You now know

REG - regional programme

authorisation of that KeyCard which was not

exactly which programme you have tuned

used for the „learning“ process.

 

into, making it easy to find the desired station

Certain radio programmes are split up at

 

Optical indication for extra

quickly.

times into regional programmes offering lo-

But RDS offers you further advantages:

cal information. The 1st programme broad-

security

 

cast by NDR, for example, offers program-

 

AF - Alternative frequency

mes with different contents in the northern

When the car is stationary, the KeyCard

The AF (Alternative Frequency) function

states of Germany Schleswig-Holstein, Ham-

burg and Lower Saxony at certain times of

tongue can be switched to flash for extra anti-

makes sure that the strongest frequency of

the day. If you are listening to one program-

theft security.

the currently selected programme is always

me and move to an area where another

For this, the following requirements must be

tuned in automatically.

linked regional programme becomes stron-

fulfilled:

This function is activated when “AF” appears

ger, the unit will switch to that programme.

Permanent 12 V supply and the + ignition

in the display.

If you wish to continue listening to the first

lead must be connected correctly (as illustra-

In order to switch this function on or off,

programme,

ted in the installations instructions).

• press the AF button briefly.

• press the AF button for approximately 2

„LED 1“ must be adjusted in the DSC mode.

While searching for the strongest reception

seconds.

Please refer to chapter „DSC programming -

signal, the radio may switch to mute briefly.

“REG ON” appears in the display.

LED“.

 

 

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

25

Image 9
Contents Wiesbaden RCM Deutsch Contents On Off Volume Short instructionsAUD/GEO AUD Cassette removal Press Cassette loading slot MTL Dolby B-NRDisplay Radio operationFast winding/PROG button ? 1, 2, 3, 4, 5, 6 preset buttons= SC/MIX SRC SourceTraffic safety PrecautionsInstallation/Connection Important notesPutting the unit into operation KeyCard theft-protection systemRemoving the KeyCard Defining a second KeyCard/ Replacing a KeyCardREG regional programme Radio operation with RDS Radio Data SystemOptical indication for extra SecurityAutomatic tuning Manual tuningAutomatic tuning Scrolling through the broad- casting networkSelecting the seek tuning sensi Sampling stored stations briefly Preset ScanTivity Scanning stations withSwitching the warning beep off Switching from stereo to monoReceiving traffic programme stations with RDS-EON Traffic announcement priorityTape operation Automatic seek tuning startInserting a tape Removing a tapeProg selector Switching the audio sourceDolby B-NR* Tape equalisation with B/MTL Skipping/repeating titles with CPSTape care DSC programmingDIS Local loBeep Overview of the DSC factory settingsLED code LoudSwitching to changer operation Selecting a disc/track using the rocker switchCD changer control optional Appendix SpecificationsAmplifier FM wavebandBlaupunkt-Werke GmbH
Related manuals
Manual 20 pages 5.11 Kb Manual 19 pages 10.96 Kb