Blaupunkt RCM 85 Sampling stored stations briefly Preset Scan, Selecting the seek tuning sensi

Page 11

Notice:

Should you tune in a station which has alrea- dy been stored before, the corresponding preset button and the memory bank will briefly flash in the display if you have selected another memory bank.

Automatically storing the stron- gest stations with Travelstore

You can automatically store the six most powerful FM stations of your current recepti- on area sorted according to their signal strength. This function is particularly conve- nient on longer trips.

Press the TS button for more than 2 seconds.

Sampling stored stations briefly (Preset Scan)

With this function you can briefly sample all SC/MIX stations.

Press SC/MIX.

The radio will briefly play all the stored stations one after another.

The system will sample the stations of one of the memory banks I, II, or T, depending on which bank was selected before. Free preset buttons will be skipped.

To switch off Preset Scan:

Press SC/MIX once again.

The radio will continue to play the cur- rently sampled station.

To select a station currently being scan-

 

DEUTSCH

ned and switch off the scan function:

 

 

 

• Press SC/MIX briefly.

 

 

 

ENGLISH

If no station is selected, the scan function will

be automatically switched off after the fre-

quency band has been run through comple-

 

tely. The unit will tune in the station listened

 

 

 

to before starting the scan.

FRANÇAIS

Selecting the seek tuning sensi-

tivity

 

 

You can alter the automatic seek tuning

ITALIANO

sensitivity.

If “lo” is displayed, the radio will only pick up

strong, local stations (low sensitivity).

 

 

If “lo” does not light up, the radio will also pick

 

The radio will search for the strongest FM

Scanning stations with

stations and store them on the memory bank

Radio-Scan

T (Travelstore). When this process has been

completed, the radio will play the first station.

Beginning with the station currently tuned

in,you can scan the waveband. The radio will

If desired, stations can also be stored manu-

 

ally on the Travelstore bank (see “Storing play each station for 8 seconds.

stations”).

To start the scan:

 

up weaker, distant stations (high sensitivity).

NEDERLANDS

To switch over,

• Press lo.

 

The degree of sensitivity can be altered in

SVENSKA

both modes (see also chapter “DSC pro-

gramming”).

 

Recalling stored stations

You can recall any stored station by pressing the corresponding preset button.

Select the waveband using FM or TS.

Press SC/MIX briefly.

The scanned frequency or the station name will start flashing in the display. During the actual scanning process “SCAN” will be displayed.

ESPAÑOL

 

Briefly press the corresponding preset button.

PORTUGUÊS

27

Image 11
Contents Wiesbaden RCM Deutsch Contents AUD/GEO AUD On Off VolumeShort instructions Radio operation MTL Dolby B-NRCassette removal Press Cassette loading slot DisplaySRC Source ? 1, 2, 3, 4, 5, 6 preset buttonsFast winding/PROG button = SC/MIXImportant notes PrecautionsTraffic safety Installation/Connection Defining a second KeyCard/ Replacing a KeyCard KeyCard theft-protection system Putting the unit into operation Removing the KeyCardSecurity Radio operation with RDS Radio Data SystemREG regional programme Optical indication for extraScrolling through the broad- casting network Manual tuningAutomatic tuning Automatic tuningScanning stations with Sampling stored stations briefly Preset ScanSelecting the seek tuning sensi TivityTraffic announcement priority Switching from stereo to monoSwitching the warning beep off Receiving traffic programme stations with RDS-EONRemoving a tape Automatic seek tuning startTape operation Inserting a tapeSkipping/repeating titles with CPS Switching the audio sourceProg selector Dolby B-NR* Tape equalisation with B/MTLLocal lo DSC programmingTape care DISLoud Overview of the DSC factory settingsBeep LED codeCD changer control optional Switching to changer operationSelecting a disc/track using the rocker switch FM waveband SpecificationsAppendix AmplifierBlaupunkt-Werke GmbH
Related manuals
Manual 20 pages 5.11 Kb Manual 19 pages 10.96 Kb