MP3 MODE
Scanning tracks (SCAN)
You can briefly play all the tracks on the CD.
➮Press and hold down the OK but- ton : for longer than two sec- onds. The next track will then be played briefly.
“TRACK SCAN” appears in the display alongside the flashing track numbers. The tracks on the CD are briefly played in ascending order.
Note:
●You can set the scanning time. For further details on setting the scan- ning time, please read the section entitled “Setting the scanning time” in the “Radio mode” chapter.
Stopping SCAN and continuing listening to a track
➮Briefly press the OK button :.
The currently scanned track will then continue to be played normally.
Repeating individual tracks or whole directories (REPEAT)
To play the current track repeatedly,
➮briefly press the 5 RPT button ;.
“REPEAT TRACK” appears briefly in the display and RPT lights up.
To repeat the whole directory,
➮press and hold down the 5 RPT button ; for longer than two sec- onds.
“REPEAT DIR” appears briefly in the display.
Cancelling REPEAT
To stop the current track or current di- rectory from being repeated,
➮briefly press the 5 RPT button ;.
“REPEAT OFF” appears briefly and RPT disappears from the display.
Pausing playback (PAUSE)
➮Press the 6 
button ;. “PAUSE” appears in the display.
Cancelling pause
➮Press the 6 
button ; while in pause mode.
Playback is resumed.
Configuring the display
Configuring the default display
You can display various information on the current track:
●Track number, playing time and di- rectory number
●Track number, playing time and clock time
After you switch tracks, the device first displays the MP3 scrolling text once and then it displays the above information continuously.
To switch between the different display options,
➮press the DIS button 8.
56