Listening to stored stations

RADIO MODE

➮Select the memory bank or wave- band.

➮Press the station button 1 - 3 6 or 4 - 6 ; that the station you want to listen to is assigned to.

Scanning receivable stations (SCAN)

You can use the scan function to briefly play all the receivable stations. You can set the scanning time in the menu to between 5 and 30 seconds.

Starting SCAN

➮Press and hold down the OK but- ton : for longer than two sec- onds.

Scanning begins. “SCAN” appears briefly in the display followed by a flash- ing display of the current station name or frequency.

Cancelling SCAN and continuing listening to a station

➮Press the OK button :.

Scanning stops and the radio continues playing the station that it tuned into last.

Setting the scanning time

➮Press the MENU button 9.

➮Press the or button 7 repeat- edly until “SCAN TIME” appears in the display.

➮Set the scanning time that you

want using the buttons 7.

When you have finished making your changes,

➮press the MENU button 9 twice or the OK button : twice.

Note:

●The scanning time that you set is also applied by the system to scan- ning carried out in CD/MP3 and CD-changer mode.

Programme type (PTY)

Besides transmitting the station name, some FM stations also provide informa- tion on the type of programme that they are broadcasting. Your car radio can receive and display this information.

For example, the programme types can be:

CULTURE TRAVEL JAZZ

SPORT NEWS POP

ROCK CLASSICS

You can use the PTY function to select stations of a particular programme type.

PTY-EON

If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type.

Note:

●If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and “NO PTY” appears briefly in the display. The radio will then retune to the station that it received last.