VOLUME ADJUSTMENT
Volume Adjustment
The volume can be adjusted in steps from 0 (off) up to 66 (maximum).
➮To increase the volume, turn the volume control 2 to the right.
➮To reduce the volume, turn the vol- ume control 2 to the left.
Setting Switch-On Volume
➮Press the MENU button 8.
➮Press the 
button :until “ON VOLUME” appears in the display.
➮Adjust the
the 
buttons :.
If you set “0”, then whatever volume was in use before the device was switched off will be reactivated.
Risk of serious injury! If the level of
If the volume was set to maximum before switching off, and the value for the
➮When the setting process is com- plete, press the MENU button 8 or OK ;.
Immediate Volume Reduction (Mute)
You can reduce the volume immediate- ly (mute) to a
➮Press button 3 briefly. “MUTE” appears in the display.
Adjusting Muted Volume
The mute level is adjusted as follows:
➮Press the MENU button 8.
➮Press the 
button :until “MUTE LEVEL” appears in the display.
➮Adjust the mute level with the 
buttons :.
➮When the setting process is com- plete, press the MENU button 8 or OK ;.
Telephone Audio/Navigation Audio
If your car radio is connected to a mo- bile telephone or navigation system, then when the telephone is taken “off the hook”, or when the navigation sys- tem is speaking, the car radio is muted. The telephone conversation or speech output are reproduced via the car radio speakers.This requires the mobile tele- phone or navigation system to be con- nected to the car radio as described in the installation instructions.
Your Blaupunkt dealer can tell you which navigation systems can be used with your car radio.
If a traffic announcement is received during a telephone call, or while the navigation system is speaking, the traf-
38