EQUALIZER
The microphone position for situation 1 (e.g. driver alone) is at the height of the driver’s head.
For situation 2, hold the microphone between driver and passenger.
For situation 3, hold the microphone in the centre (left/right, back/front) of the vehicle’s interior.
These measurements require really quiet surroundings. Outside noise dis- torts the results.
Note:
Sound output from the loudspeakers must not be blocked by objects. All loud- speakers must be connected. The mi- crophone must be connected to the device.
To take automatic equalizer measure- ments:
➮Hold the microphone at the desired position inside the vehicle.
➮Press the DEQ+ button <.
➮Use the 
or 
button : to select “AUTO DEQ+”.
➮Use the 
buttons :to enter USER mode.
➮Use the 
or 
button :to choose between “USER 1”, “USER 2” and “USER 3”.
➮Hold the DEQ+ button <pressed for longer than 2 seconds.
A countdown runs in the display. During the countdown, you can still reposition the microphone. When the countdown is over, the automatic measurement starts and “MEASURING” shows in the display. The process lasts about 1 minute.
If an error occurs during measurement or if the microphone is not properly con- nected, “ERROR” appears in the display and the process is interrupted.
Stopping Automatic Measurement
To stop the automatic measurement procedure:
➮Briefly press the DEQ+ button < or OK ;.
Adjusting Sound Measurements Manually
To change the settings for USER 1 - USER 3 manually:
➮Press the DEQ+ button <.
➮Use the 
or 
button : to select “AUTO DEQ+”.
➮Use the 
buttons :to activate USER mode.
➮Use the 
or 
button : to select “USER 1”, “USER 2” or “USER 3”.
➮Use the 
buttons :to select a filter.
➮Press the 
or 
button :.
➮Use the 
button :to select a fre- quency.
ENGLISH
55