TRAFFIC INFORMATION | CD OPERATION |
Adjusting the Volume for Traffic Announcements
➮Press the MENU button 8.
➮Press the 
button :until
“TA VOLUME” appears in the dis- play.
➮Use the 
buttons : to adjust the volume.
➮When the setting process is com- plete, press the MENU button 8 or OK ;.
Note:
During a traffic announcement you can adjust the volume for the duration of the announcement using the volume con- trol 2.
Note:
You can set the tone and volume for traf- fic announcements. For more informa- tion, consult the section on “Tone and volume controls”.
CD Operation
This device can be used to play stand- ard CDs with a diameter of 12 cm.
Danger of damage to CD drive! This device is not suited for playing
No liability will be accepted for dam- age caused to the CD drive by un- suitable CDs.
Starting CD Operation
●If there is no CD in the drive
➮Press the 
button 9. The
➮Push the CD printed side up gently into the CD slot until you feel it stop.
The CD is then automatically drawn into the device.
While the CD is being drawn in, do not push or pull it.
➮Close the
The CD begins playing.
●If there is already a CD in the drive.
➮Press the CD•C button @ until “CD” appears in the display.
The CD starts playing where it last stopped.
Selecting a Track
➮Use the arrow keys : to select the next or previous track.
Pressing the 
or 
button :once re- starts the track currently playing.
46