LOUDNESS | EQUALIZER |
Switching Loudness
On / off
Loudness refers to boosting the bass and treble at low volume levels to match the ear’s sensitivity.
➮Press the AUD/LD button = for about 2 seconds.
If loudness is switched on, LD shows in the display.
Setting Loudness Intensity
The loudness boost can be set in steps from one to six.
➮Press the MENU button 8. “MENU” appears in the display.
➮Press the 
button :until “LOUD- NESS” appears in the display.
➮Press the 
or 
button : to ad- just the boost.
➮When the setting process is com- plete, press the MENU button 8 or OK ;.
Equalizer
This device is equipped for automatic, digital sound measurement, using three-
Using the microphone included, the settings for equalizers USER 1 - USER 3 can be measured automatical- ly.
In addition, the automatically measured values can be adjusted and the equal- izer can be set manually.
The device also has a parametric 5- band digital equalizer and six sound presets.
Switching Equalizer On / Off
➮To switch the equalizer on, hold down the DEQ+ button <until “EQ ON” flashes up and DEQ ap- pears in the display.
➮To switch the equalizer off, hold down the DEQ+ button <until “EQ OFF” flashes up and DEQ dis- appears from the display.
Automatic Sound Measurement
You can make and store electronic measurements for three different situa- tions/users, for example:
USER 1 driver alone
USER 2 driver and passenger USER 3 front and back seats occu-
pied
While the measurements are being made, hold the microphone in the cor- responding position.
54