CD CHANGER OPERATION
Ending MIX function
➮Press button 5 MIX > until “MIX OFF” flashes up and “MIX” disappears.
Sampling All Tracks on All CDs (SCAN)
➮To listen to short samples of all tracks on all the CDs in the CD
changer in ascending order, press the OK button ; for longer than 2 seconds.
“SCAN” appears in the display.
Ending SCAN
➮To halt the scan, press OK ; briefly.
The track currently being sampled will continue to play.
Note:
The lengths of these samples can be set. Please consult the section on “Set- ting Scan Time” under “Radio Opera- tion”.
Pausing During Play
➮Press button 3 
>. “PAUSE” appears in the display.
Continuing after the pause
➮Press button 3 
> again. Play resumes.
Naming CDs
In order to recognise your CDs more effectively, the car radio allows you to give individual names to up to 99 CDs. The names may have up to seven char- acters.
If you attempt to assign more than 99 names, the display will show “FULL”.
Entering and changing CD names
➮Press the MENU button 8.
➮Use the 
or 
button : to select “CDC NAME”.
➮Press the 
or 
button :.
The device is now in selection mode.
➮Choose the CD that you want to name with the 
or 
button :.
➮Press the 
or 
button :.
The device enters edit mode. If your chosen CD is not yet named, seven underscores appear in the display.
➮The current entry location flashes.
➮Use the 
or 
button : to select your characters. If a space is re- quired, select the underscore.
➮Use the 
or 
button :to change the input location.
➮To save the name, press the MENU button 8 or OK ;.
Deleting a CD name
➮Start playing the CD whose name is to be deleted.
➮Press the MENU button 8.
50