ENGLISH
EXTERNAL COMPONENT OPERATIONS
* Not compatible with | Portable MD player, etc. | |
digital signals. | ||
| ||
| Auxiliary input | |
| (AUX)* |
Playing an external component
You can connect two external components to this unit.
Connect one to the CD changer jack on the rear using the Line Input Adapter
Preparations:
•For connecting the Line Input Adapter
•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to
•If the input level of the external component connected to the AUX input jack is not high enough, increase the input level properly. (See “To adjust the auxiliary input
1 Select the external component (LINE IN or AUX IN).
To select “LINE IN” (component connected to the CD changer jack on the
rear), press CD
CD LINE IN*
•If “LINE IN”* does not appear on the display, see page 35 and select the external input
(“LINE IN”).
*Displayed only when one of the following sources is
To select “AUX IN” (component connected to the AUX jack on the control panel),
press and hold CD CD-CH (AUX).
Note on
When you press CD
2 Turn on the connected component and start playing the source.
3 Adjust the volume.
4 Adjust the sound characteristics you want. (See pages 30 and 31.)
42