Selecting preset sound modes (C-EQ: custom equalizer)
You can select a preset sound mode
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Press MODE.
“MODE” flashes on the lower part of the display, and the number buttons work as different function buttons.
2 Press EQ (equalizer) while “MODE” flashes on the display.
The last selected sound mode
is recalled and applied to the current source.
Sound mode indicator flashes.
Ex.: If you have selected “USER” previously
3 Select the sound mode you want.
Each time you press the button, the sound modes change as follows:
USER ROCK CLASSIC
JAZZ HIP HOP POPS
Indication | For: |
| Preset values | ||
|
| BAS |
| TRE | LOUD |
|
|
|
|
|
|
USER | (Flat sound) | 00 |
| 00 | OFF |
|
|
|
|
|
|
ROCK | Rock or | +03 |
| +01 | ON |
| disco music |
|
|
|
|
|
|
|
|
|
|
CLASSIC | Classical | +01 |
| OFF | |
| music |
|
|
|
|
|
|
|
|
|
|
POPS | Light music | +04 |
| +01 | OFF |
|
|
|
|
|
|
HIP HOP | Funk or Rap | +02 |
| 00 | ON |
| music |
|
|
|
|
|
|
|
|
|
|
JAZZ | Jazz music | +02 |
| +03 | OFF |
|
|
|
|
|
|
Note:
You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on page 24.
To store a sound mode separately for each playback source
You can select a sound mode and store it in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, tape and external components.
1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
2Press ¢ or 4 to select “CEQ LINK (custom equalizer link).”
3Turn the control dial clockwise to select “LINK ON.”
4Press SEL (select) to finish the setting.
To cancel
Note:
When you change the “CEQ LINK” setting, the sound
mode
ENGLISH
Sound mode indicator flashes.
Ex.: When you select “ROCK”
23