Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
DAB
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps
(87.5 MHz – 108.0 MHz for FM 1 and FM 2), in 30 kHz intervals (65 MHz – 74 MHz for FM 3) and 9 kHz for AM – MW/LW until you release the button.
ENGLISH
FM1 FM2 FM3 AM
(F1) (F2) (F3) (AM)
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an
FM broadcast.
2 Press and hold ¢ or 4 until “MANU (manual)” starts flashing on the display.
Selected band appears.
3 Tune in to a station you want while “MANU” is flashing.
Press ¢ to tune in to stations of higher frequencies.
Press 4 to tune in to stations of lower frequencies.
When an FM stereo broadcast is hard to receive:
1Press MODE to enter the functions
mode while listening to an FM stereo broadcast.
“MODE” flashes on the lower part of the display, and the number buttons work as different function buttons.
2 Press MO (monaural), while “MODE” flashes on the display, so that the MO indicator lights up on the display.
Then, each time you press MO (monaural), the MO indicator lights up and goes off alternately.
Lights up when receiving an FM broadcast in stereo.
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
9