EXTERNAL COMPONENT OPERATIONS
DAB
TAPE
EQ
Playing an external component Note on One-Touch Operation:
When you press TAPE
You can connect the external component to the CD to turn on the power. changer jack on the rear using the Line Input Adaptor
ENGLISH
Preparations:
•For connecting the Line Input Adaptor
•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 27.)
1 Select the external component (LINE IN).
2 Turn on the connected component and start playing the source.
3 Adjust the volume.
TAPE
TAPE
4 Adjust the sound characteristics you want. (See pages 22 – 24.)
LINE IN
(or CD)
•If “LINE IN” does not appear on the display, see page 27 and select the external input (“LINE IN”).
•Displayed only when one of the following sources is selected – FM, AM and tape.
31