JVC GET0070-001A, 0302KKSMDTJEIN manual Troubleshooting, Symptoms Causes Remedies

Page 36

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes				Remedies

•		A cassette tape cannot be	You have tried to insert a	Insert the cassette with the
		inserted.	cassette in the wrong way.	exposed tape facing right.

• A cassette tape cannot be			Cassette ejection is prohibited.	Press and hold TAPE CD-CH
		ejected.		and				for more than two


				seconds.

•		Cassette tapes become hot.	This is not a malfunction.
•		Cassette tapes become hot.	This is not a malfunction.

•		Tape sound is at very low	The tape head is dirty.	Clean it with a head cleaning
		level and sound quality is		tape.
		degraded.

• Sound is sometimes			Connections are not good.	Check the cords and
		interrupted.		connections.

•		Sound cannot be heard from	The volume is turned to the	Adjust it to the optimum level.
		the speakers.	minimum level.

			Connections are incorrect.	Check the cords and
				connections.

•		SSM (Strong-station	Signals are too weak.	Store stations manually.
		Sequential Memory)
		automatic preset does not
		work.

•		Static noise while listening to	The antenna is not connected	Connect the antenna firmly.
		the radio.	firmly.

•		This unit does not work at all.	The built-in microcomputer may	Press the reset button on the
			function incorrectly due to	panel holder. (The clock setting
			noise, etc.	and preset stations stored in
				memory are erased.) (See
				page 2.)

36

Image 36

Contents KS-FX925R GET0070-001A EEHow to reset your unit How to use the Mode buttonContents Location of the Buttons Control panelDisplay window Disp display buttonInstalling the battery Place the batteryReturn the battery holder Remove the battery holderRemote controller RM-RK50Turning on the power To drop the volume in a momentTo turn off the power Radio Operations Listening to the radioSearching a station automatically Auto search When an FM stereo broadcast is hard to receive Searching a station manually Manual searchTune in to a station you want while Manu is flashing FM station automatic preset SSM Manual presetFM1 FM2 Tuning in to a preset station Have not stored them yet, see Storing stationsRDS Operations What you can do with RDSTo use Network-Tracking Reception Using TA Standby Reception To deactivate the TA Standby Reception, pressUsing PTY Standby Reception To deactivate the PTY Standby ReceptionSearching your favourite programme To store your favourite programme typesStation Memory and the selected code nameTo search your favourite programme type Press and hold TP PTY for more thanSelect one of the PTY codes Setting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PTY codes Tape Operations Listening to a cassetteTo stop play and eject the cassette To fast-forward and rewind a tapeTo cancel the Dolby B NR, repeat steps 1 and 2 above again To cancel the prohibition and unlockProhibiting cassette ejection To play back tapes recorded with the Dolby B NRTo cancel Blank Skip, repeat the same Playing the current tune repeatedlySkipping the blank portions on the tape Now Blank Skip is ActivatedSound Adjustments Adjusting the soundSelecting preset sound modes C-EQ custom equalizer Press ModePress EQ equalizer while Mode flashes on the display Select the sound mode you wantStoring your own sound adjustments When CEQ Link is set to Link onWhen CEQ Link is set to Link OFF To reset to the factory settings, repeatSetting the clock Changing the general settings PSMBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items 24H/12HTo select the dimmer mode Dimmer To set the clock display ClockTo select the level meter Level To select the telephone muting TELDetaching the control panel Attaching the control panelUnlock the control panel CD Changer Operations Playing CDsTo fast-forward or reverse the track To go to the next or previous tracksTo go to the next or previous discs To go to a particular disc directlyRND1 RND2 RPT1 RPT2Adjust the sound characteristics you want. See pages 22 Playing an external component Note on One-Touch OperationLine What is DAB system? Select the DAB tunerSelect the DAB band DAB1, DAB2 or DAB3 Before you startTuning in to an ensemble To restore the FM/AM tunerStoring DAB services in memory Select the DAB band DAB1, DAB2 or DAB3 you wantTuning in to a preset DAB service Select the number 1 6 for the preset DAB service you wantWhile receiving a DAB service To use the Alternative Reception DAB AFTroubleshooting Symptoms Causes RemediesWhen connecting to the CD changer Reset button of the CD changerMaintenance To clean the headTo keep the tape clean Ignition key-off release/Ignition key-on playSpecifications FM TunerMW Tuner LW TunerHaving Trouble with operation? Please reset your unit