JVC GET0075-001A RDS Operations, What you can do with RDS, To use Network-Tracking Reception

Page 12

RDS OPERATIONS

ENGLISH

What you can do with RDS

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. For example, the stations send their station names, as well as information about what type of programme they broadcast, such as sports or music, etc.

Another advantage of RDS function is called “Enhanced Other Networks.” By using the Enhanced Other Networks data sent from a station, you can tune in to a different station of a different network broadcasting your favourite programme or traffic announcement while listening to another programme or to another source such as CD.

By receiving the RDS data, this unit can do the following:

•Tracing the same programme automatically (Network-Tracking Reception)

•Standby Reception of TA (Traffic Announcement) or your favourite programme

•PTY (Programme Type) search

•Programme search

•And some other functions

Tracing the same programme automatically (Network-Tracking Reception)

When driving in an area where FM reception is not good, the tuner built in this unit automatically tunes in to another RDS station, broadcasting the same programme with stronger signals. So, you can continue to listen to the same programme in its finest reception, no matter where you drive. (See the illustration on the next page.)

Two types of the RDS data are used to make Network-Tracking Reception work correctly — PI (Programme Identification) and AF (Alternative Frequency).

Without receiving these data correctly from the RDS station you are listening to, Network- Tracking Reception will not operate.

To use Network-Tracking Reception

You can select the different modes of network- tracking reception to continue listening to the same programme in its finest reception.

When shipped from the factory, “AF” is selected.

• AF:

Network-Tracking Reception is

 

activated with Regionalization set to

 

“off.”

 

With this setting, the unit switches to

 

another station within the same

 

network when the receiving signals

 

from the current station become

 

weak. (In this mode, the programme

 

may differ from the one currently

 

received.)

 

The AF indicator lights up but the

 

REG indicator does not.

•AF REG: Network-Tracking Reception is activated with Regionalization set to “on.”

With this setting, the unit switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak.

Both the AF indicator and the REG indicator light up.

• OFF:

Network-Tracking Reception is

 

deactivated.

 

Neither the AF indicator nor the REG

 

indicator lights up.

 

REG indicator

AF indicator

Note:

If a DAB tuner is connected and Alternative Reception (for DAB services) is activated, Network-Tracking Reception is also activated (“AF”) automatically. On the other hand, Networking-Tracking Reception cannot be deactivated without deactivating Alternative Reception. (See page 45.)

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents KD-LH7R/KD-LH5R GET0075-001A E/EXHow to reset your unit Position And Reproduction Of LabelsContents Mode M button Location of the ButtonsControl panel Display windowInstalling the battery Place the batteryReturn the battery holder Remove the battery holderRemote controller RM-RK50To drop the volume in a moment To turn off the powerAdjust the sound as you want. See pages 29 Basic OperationsWhen a station is received, searching stops Radio OperationsListening to the radio Searching a station automatically Auto searchWhen an FM stereo broadcast is hard to receive Searching a station manually Manual searchSelect the band FM1 3, AM Tune in to a station you want while Manu is flashingFM station automatic preset SSM Manual presetSelect the FM band FM1 3 you want to store FM stations into Press and hold both buttons for more than 2 secondsTuning in to a preset station RDS Operations What you can do with RDSTo use Network-Tracking Reception Using TA Standby Reception When the current source is FM, the TPTo deactivate the TA Standby Reception, press Using PTY Standby Reception Searching your favourite programme Press and hold TP/PTY T for more than 2 secondsBelow Last selected PTY code appearsChanging the display mode while listening to an FM station PS NameFreq PTYSetting the TA volume level Automatic clock adjustmentPTY codes CD Operations Playing a CDOpen the control panel Insert a disc into the loading slotTo stop play and eject the disc To fast-forward or reverse the trackTo go to the next or previous tracks To go to a particular track directlyTo play back tracks at random Random Play To play back tracks repeatedly Repeat PlaySelect text display mode while playing a CD Text Prohibiting CD ejectionPlaying a CD Text While pressing CD/CD-CH, pressWhat is MP3? Precautions when recording MP3 files on a CD-R or CD-RWMP3 Introduction Compatible with ID3v1MP3 directory/file configuration MP3 playback/search orderHierarchy Level6MP3 Operations Playing an MP3 discInsert an MP3 disc into the loading slot Refer also to CD Operations on pages 19 toTo change the display information To fast-forward or reverse the fileTo skip to the next or previous files To go to a particular directory directly To skip to the previous directoryTo select a particular file in a directory, press RPT1 RPT2 Canceled Selecting MP3 playback modesTo play back files repeatedly Repeat Play Sound Adjustments Adjusting the soundEQ custom equalizer User Rock Classic Jazz HIP HOP PopsStoring your own sound adjustments Press EQ equalizer while Mode still on the displaySelect the sound mode you want to AdjustSetting the clock Changing the general settings PSMBasic Procedure Other Main FunctionsPreferred Setting Mode PSM items 24H/12HEXT To select the dimmer mode Dimmer To set the clock display ClockTo select the level meter Level To select the telephone muting TELTo select the scroll mode Scroll To turn on/off the key-touch tone BeepTo turn the tag display on or off TAG Disp only for KD-LH7R To select the external component to useTo erase the input characters Available charactersSelect a source you want to assign a name to Select a characterYou can detach the control panel when leaving the car Detaching the control panelAttaching the control panel CD Changer Operations Playing CDsSelect the CD automatic changer CD-CH CD-CHTo go to a particular disc directly To show the CD Text informationTo go to the next discs or the previous discs Canceled To play back tracks at random Random PlayRND1 RND2 RPT1 RPT2Select the external component Line LineWhat is DAB system? DAB Tuner OperationsSelect the DAB tuner Select the DAB band DAB1, DAB2 or DAB3To restore the FM/AM tuner Select a service you want to listen toService name Ensemble name Channel number Frequency To tune in to a particular ensemble without searchingStoring DAB services in memory Tuning in to a preset DAB serviceSelect the DAB band DAB1, DAB2 or DAB3 you want Each time you press Button, the DAB band Changes as followsTo adjust the DAB volume level Select the number 1 6 for the preset DAB service you wantTo use Alternative Reception You can keep listening to the same programTroubleshooting Symptoms Causes RemediesReset button of the CD changer Reset 1 Reset Types of audio tracks togetherMaintenance Handling CDsSpecifications FM TunerFor KD-LH7R only AM TunerHaving Trouble with operation? Before mounting Press Vor dem Einbau Drücken SieAvant le montage Appuyer sur Begint Druk opOpmerking Do not connect the speaker leads of the power Avant de commencer la connexion vérifiezNE Connectez PAS les fils d’enceintes du Cordon d’alimentation à la batterie sinonCause damage to this unit OderFuse blows No sound from the speakers
Top Page Image Contents