CD OPERATIONS
ENGLISH
Playing a CD
1 Insert a disc into the loading slot.
The unit turns on, draws in the CD and starts playback automatically.
Notes:
•When a CD is inserted upside down, the CD automatically ejects.
•When you play a CD Text, the disc title and performer appear on the display. Then the current track title appears on the display, followed by the track number and elapsed playing time. See also “Playing a CD Text” (page 15) and “Selecting the scroll mode – SCROLL” (page 32).
If a CD Text includes much text information, some may not appear on the display.
•If you play a CD with assigned name (see page 33), the assigned name appears on the display, followed by the track number and elapsed playing time. See also “Showing an assigned name” on page 15.
CD indicator lights up.
Total track number of | Total playing time of |
the inserted disc | the inserted disc |
\ |
Current track Elapsed playing time
Note on
When a CD is already in the loading slot, pressing CD/CH turns on the unit and starts playback automatically.
12
To stop play and eject the CD
Press CD 0.
CD play stops and the CD automatically ejects from the loading slot (“EJECT” appears on the display). The source changes to the last selected source.
Notes:
•If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (CD play will not start this time.)
•You can eject the CD even when the unit is turned off.
•If you change the source, CD play also stops (without ejecting the disc).
Next time you select “CD” as the source, CD play starts from where playback had been stopped previously.