RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular station.
Searching for a station automatically: Auto search
1 Select the band (FM1, FM2, FM3 or AM).
FM1 FM2FM3 AM
Note:
This receiver has three FM bands (FM1, FM2, and FM3). You can use any one of them to listen to an FM broadcast.
Selected band appears.
2 Start searching for a station.
To search stations of higher frequencies
To search stations of lower frequencies
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching for a station manually: Manual search
1 Select the band (FM1, FM2, FM3, or AM).
FM1FM2FM3 AM
2 Press and hold ¢ or 4 until “M (manual)” starts flashing on the display.
3 Tune in to a station you want while “M” is flashing.
Press ¢ to tune in to stations of higher frequencies.
Press 4 to tune in to stations of lower frequencies.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.
8