JVC LVT1311-003A manual Troubleshooting, Symptoms Causes Remedies

Page 54

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

 

 

Symptoms

Causes

Remedies

 

 

• Sound cannot be heard

The volume level is set to the

Adjust it to the optimum

 

 

from the speakers.

minimum level.

level.

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

connections.

 

 

• The receiver does not work

The built-in microcomputer

Reset the receiver (see page

General

 

at all.

may have functioned

2).

 

• “Connect Error” appears on

The control panel is not

Remove the control panel,

 

 

 

incorrectly due to noise, etc.

 

 

 

the display.

attached correctly.

wipe the connector, then

 

 

 

 

attach it again (see pages 42

 

 

 

 

and 49).

 

 

• “Push Reset” appears on

Something is blocking the

Reset the receiver (see page

 

 

the display and the control

control panel movement.

2). If this does not work,

 

 

panel movement is freezed.

 

check the installation.

 

 

• SSM automatic presetting

Signals are too weak.

Store stations manually.

 

 

does not work.

 

 

 

 

• Static noise while listening

The aerial is not connected

Connect the aerial firmly.

 

 

to the radio.

firmly.

 

FM/AM

 

• “No Text” appears on the

The station does not support

Check the Network-Tracking

 

display.

RDS RT or the reception is

Reception (see page 16).

 

 

 

 

 

weak.

 

 

 

• “Loading” does not

The receiving signal is

Check the Network-Tracking

 

 

disappear.

temporarily too weak to

Reception (see page 16).

 

 

 

receive a complete message

 

 

 

 

although the service is

 

 

 

 

available.

 

 

 

• CD-R/CD-RW cannot be

CD-R/CD-RW is not

• Insert a finalized CD-R/

 

 

played back.

finalized.

CD-RW.

 

 

• Tracks on the CD-R/

 

• Finalize the CD-R/CD-RW

 

 

CD-RW cannot be skipped.

 

with the component which

 

 

 

 

you used for recording.

playback

 

• Disc cannot be ejected.

Disc is locked.

Unlock the disc (see page 23).

 

• Disc cannot be recognized

The CD player may have

Eject the disc forcibly (see

 

 

 

 

(“No Disc,” “Loading

functioned incorrectly.

page 4).

Disc

 

Error,” or “Eject Error”

 

 

 

flashes).

 

 

 

 

• Disc sound is sometimes

You are driving on rough

Stop playback while driving

 

 

interrupted.

roads.

on rough roads.

 

 

 

Disc is scratched.

Change the disc.

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

connections.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents KD-SHX751 How to reset your unit EnglishContents How to read this manual How to forcibly eject a discFollowing marks are used to indicate How to change the display pattern How to enter the various menusEnter the selected menu Control panel KD-SHX751 Parts identificationMain elements and features Remote controller RM-RK300Installing the lithium coin battery CR2025Getting started To turn off the powerTo drop the volume in a moment ATT Basic operationsFinish the procedure Canceling the display DemonstrationSetting the clock Enter the PSM menu see Select OffListening to the radio When an FM stereo broadcast is hard to receiveRadio operations To tune in to a station manuallyTo restore the stereo effect, repeat the same Enter the Mode menu see Select LO/DX Select LocalEnter the Mode menu see Select SSM Storing stations in memoryEnter the Mode menu see Select List Select a preset number Manual presettingWhen using the remote controller Store the stationFM RDS operations Select a PTY code⁄ Start searching for your favorite programme PTY codes Select PTYMemory Select a preset numberWhat you can do with RDS Storing your favorite programmesTo activate TA Standby Reception Using the Standby Receptions TA Standby ReceptionPTY Standby Reception To activate the PTY Standby ReceptionTracking the same programme What is RDS RadiotextUsing the message service Network-Tracking ReceptionAbout MP3 and WMA discs Disc/SD card operationsPlaying a disc in the receiver To stop play and eject the discPlaying discs in the CD changer When the current disc is an MP3 discWhen the current disc is an audio CD or a CD Text disc About the CD changer~ Detach the control panel Playing an SD cardAbout the SD card To eject the SD card, press the SD card againAttach the control panel If an SD Card has been loadedSelecting a disc/folder/track on the list When Disc is selectedOther main functions To select a discTo start playback When Folder is selectedWhen File is selected To select a folder To start playbackSelecting the playback modes To cancel the prohibitionProhibiting disc ejection After making sure No Eject? is selected highlightedMode Plays repeatedly Mode Plays at randomMode Selecting the DSP modes-DSP Sound adjustmentsAdjust the effect level 1 Available DSP modesIf you select 4ch, select your car size To make further precise settings for the DSP modesSetting items Select your listening seat positionEnter the CCC menu see Select On Making sound naturalTo activate BBE Digital Enter the BBE menu see Select the effect levelAdjust the selected setting item To adjust fader and balance -Fad/BalTo adjust subwoofer output- Subwoofer Selection menu-SELEnter the EQ menu see Select a sound mode To adjust the input level of each source-VolAdjustSelecting preset sound modes Available sound modesSound Preset equalizing values Mode Storing your own sound modesSelect the picture size-Large or Small Basic procedureGraphic displays @ Select the itemSelect the file type-either Picture or Movie Downloading the filesDownloading pictures or animations Select a folderDeleting the files Deleting the stored pictures and animationsDownload the file To delete the stored pictures To delete all the stored pictures To delete all the stored filesTo delete the stored animation Activating the downloaded files Adjust the setting General settings PSMBasic procedure Indications Selectable settings, referenceClock Hr PTyStandby DAB AF*2 Enter the PSM menu see Selecting the dimmer modeSelect a setting Select DimmerOther main functions To erase the entire titleSelect the source Detaching the control panel Changing the control panel angleExternal component operations Playing an external componentListening to the DAB tuner ⁄ Select a service either primary or secondary to listen toDAB tuner operations To tune in to an ensemble manuallyWhat is DAB system? To search for your favorite serviceWhen surrounding sounds are noisy Select an ensemble primary service Tuning in to a preset DAB serviceStoring DAB services in memory Store the serviceAnnouncement Standby Reception When using the remote controllerReception To deactivate the Announcement Standby ReceptionWhile receiving an FM RDS station To show the Dynamic Label Segment DLS informationTracing the same programme- Alternative Frequency Reception To deactivate the Alternative Frequency Reception, seeMaintenance More about this receiver Playing a disc/SD card Playing a CD-R or CD-RWPlaying an MP3/WMA track Changing the source Sound adjustment Selecting the DSP modes-DSPSetting the basic sound selection menu -SEL ImageLinkGeneral settings-PSM Downloading or deleting filesAssigning titles to the sources Troubleshooting Symptoms Causes RemediesMP3/WMA disc/SD card playback PICT-PSM Graphics Sounds CD changer Specifications Audio Amplifier SectionRefer to page of How to reset your unit Having Trouble with operation?KD-SHX751 Removing the receiver Retrait de l’appareilPrecautions on power supply and speaker connections Precautions sur l’alimentation et la connexion des enceintesConnect the ISO connectors as illustrated Amplificateur Tuner DAB JVCAppareil extérieur
Top Page Image Contents