Using the Standby Receptions
TA Standby Reception
TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM.
The volume changes to the preset TA volume level (see page 43).
•If the DAB tuner is connected, Standby Reception also works to search for a DAB service broadcasting Traffic Announcement.
To select your favorite PTY code for PTY Standby Reception, see page 43.
The PTY indicator either lights up or flashes.
To activate the PTY Standby Reception
1Enter the MODE menu (see page 5).
2Select “PTY.”
ENGLISH
To activate TA Standby Reception
T/P
TP indicator appears.
•If the TP indicator lights up, TA Standby Reception is activated.
•If the TP indicator flashes, TA Standby Reception is not yet activated. (This occurs when you are listening to an FM station without the RDS signals required for TA Standby Reception.)
To activate TA Standby Reception, tune in to another station (or DAB service) providing these signals. The TP indicator will stop flashing and remain lit.
To deactivate the TA Standby Reception
T/P
The TP indicator goes off.
3Select one of the PTY codes.
Selected PTY code
4Finish the procedure.
PTY indicator appears.
•If the PTY indicator lights up, PTY Standby Reception is activated.
•If the PTY indicator flashes, PTY Standby Reception is not yet activated.
To activate PTY Standby Reception, tune in to another station (or DAB service) providing these signals. The PTY indicator will stop flashing and remain lit.
PTY Standby Reception
PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY programme from any source other than AM.
•If the DAB tuner is connected, Standby Reception also works to search for a DAB service.
To deactivate the PTY Standby Reception
Select “Off” in step 3 above.
The PTY indicator goes off.
15