JVC KD-S6350 manual Troubleshooting

Page 21

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

Symptoms	Causes	Remedies

• CD cannot be played back.	CD is inserted upside down.	Insert the CD correctly.

•CD sound is sometimes You are driving on rough roads. Stop CD play while driving

	interrupted.		rough roads.

		CD is scratched.	Change the CD.

		Connections are incorrect.	Check the cords and
			connections.

•	“NO DISC” appears on the	No CD is in the loading slot.	Insert a CD into the loading slot.
	display.

		CD is inserted incorrectly.	Insert it correctly.

•	Sound cannot be heard from	The volume level is set to the	Adjust it to the optimum level.
	the speakers.	minimum level.

		Connections are incorrect.	Check the cords and
			connections.

•	SSM (Strong-station	Signals are too weak.	Store stations manually.
	Sequential Memory) automatic
	preset does not work.

•	Static noise while listening to	The antenna is not connected	Connect the antenna firmly.
	the radio.	firmly.

• CD can be neither played back		The CD player may function	Press						and 0 at the
• CD can be neither played back		The CD player may function	Press						and 0 at the
	nor ejected.	incorrectly.	same time for more than 2
			seconds. Be careful not to drop
			CD when it is ejected.

•	The unit does not work at all.	The built-in microcomputer	Press						and SEL at the


		may function incorrectly due	same time for more than 2
		to noise, etc.	seconds to reset the unit. (The
			clock setting and preset stations
			stored in memory are erased.)
			(See page 2.)

ENGLISH

21

Image 21

Contents KD-S6350 KD-S590For customer Use How to reset your unit PrecautionsInformation For USA Contents Control panel Location of the ButtonsDisplay window Display windowOnly for KD-S6350 This section is only for KD-S6350 Remote controllerInstalling the battery Preparing the remote controller 2 Place the batteryRemove the battery holder Return the battery holderTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsListening to the radio Radio OperationsSearching a station automatically Auto search Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Manual preset Tuning in to a preset stationTune in to a station of 88.3 MHz Select the band FM1 3, AMPlaying a CD CD OperationsTo stop play and eject the CD Insert a disc into the loading slotPortion on a CD To fast-forward or reverse the trackTracks To cancel the prohibition and unlock the CD Prohibiting CD ejectionPress and hold CD and 0 for more than 2 seconds Adjusting the sound Sound AdjustmentsAdjust the level Select the item you want to adjustWhen SCM Link is set to Link ON, select the source Select the sound mode you wantFor Preset values Recalling the sound modesTo reset to the factory settings Storing your own sound adjustmentCall up the sound mode you want to adjust Repeat the same procedure to store other sound modesSetting the clock To Cancel Advanced SCMOther Main Functions Selecting the level display Select the desired mode VOLVOL 2 or OFF Press and hold SEL for more than 2 secondsHow to attach the control panel How to detach the control panelHandling CDs MaintenanceTroubleshooting Specifications FM TunerAM Tuner Call Sound is distorted Fuse blowsUnit becomes hot El fusible se quemaAsegúrese de conservar las manijas después de instalarlo Be sure to keep the handles after installing itBe sure to ground this unit to the car’s chassis NotaRemarque KD-S6350/KD-S590 Precautions on power supply and speaker connections