
ENGLISH
Storing DAB services in memory
You can preset up to 6 DAB services in each DAB band (DAB1, DAB2 and DAB3) manually.
1 Select the DAB tuner.
When you select a source,
the power automatically comes on.
Each time you press the button, the source changes as described on page 7.
5 Press and hold the number button (in this example, 1) you want to store the selected service into for more than 2 seconds.
“P 1” flashes for a while.
2 Select the DAB band (DAB 1, DAB 2 or DAB 3) you want.
Each time you press and hold the button for more than 1 second, the DAB band changes as follows:
D 1 |
| D 2 |
| D 3 |
|
| |||
(DAB 1) |
| (DAB 2) |
| (DAB 3) |
3 Tune into an ensemble you want.
4 Select a service of the ensemble you want.
1 Press M/B (mode/band).
Within
5 seconds
2 Press and hold ¢
or
4to select a service you want.
6 Repeat the above procedure to store other DAB services into other preset numbers.
Notes:
•A previously preset DAB service is erased when a new DAB service is stored in the same preset number.
•Preset DAB services are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the DAB services again.
36