Kenwood TS-B2000, TS-2000X instruction manual Precautions

PRECAUTIONS

Please observe the following precautions to prevent fire, personal injury, and transceiver damage:

•Connect the transceiver only to a power source described in this manual or as marked on the transceiver itself.

•Route all power cables safely. Ensure the power cables can neither be stepped upon nor pinched by items placed near or against the cables. Pay particular attention to locations near AC receptacles, AC outlet strips, and points of entry to the transceiver.

•Take care not to drop objects or spill liquid into the transceiver through enclosure openings. Metal objects, such as hairpins or needles, inserted into the transceiver may contact voltages resulting in serious electrical shocks. Never permit children to insert any objects into the transceiver.

•Do not attempt to defeat methods used for grounding and electrical polarization in the transceiver, particularly involving the power input cable.

•Adequately ground all outdoor antennas for this transceiver using approved methods. Grounding helps protect against voltage surges caused by lightning. It also reduces the chance of a build-up of static charge.

EXAMPLE OF ANTENNA GROUNDING
	ANTENNA
	LEAD IN
GROUND	WIRE
CLAMP	ANTENNA
	DISCHARGE UNIT
	GROUNDING
	CONDUCTORS
ELECTRIC SERVICE	GROUND CLAMPS
	POWER SERVICE
EQUIPMENT
	GROUNDING ELECTRODE
	SYSTEM

•Minimum recommended distance for an outdoor antenna from power lines is one and one-half times the vertical height of the associated antenna support structure. This distance allows adequate clearance from the power lines if the support structure fails for any reason.

•Locate the transceiver so as not to interfere with its ventilation. Do not place books or other equipment on the transceiver that may impede the free movement of air. Allow a minimum of

4 inches (10 cm) between the rear of the transceiver and the wall or operating desk shelf.

•Do not use the transceiver near water or sources of moisture. For example, avoid use near a bathtub, sink, swimming pool, or in a damp basement or attic.

•The presence of an unusual odor or smoke is often a sign of trouble. Immediately turn the power OFF and remove the power cable. Contact a KENWOOD service station or your dealer for advice.

•Locate the transceiver away from heat sources such as a radiator, stove, amplifier or other devices that produce substantial amounts of heat.

•Do not use volatile solvents such as alcohol, paint thinner, gasoline or benzene to clean the cabinet of the transceiver. Use a clean cloth with warm water or a mild detergent.

•Disconnect the input power cable from the power source when the transceiver is not used for long periods of time.

•Remove the transceiver’s enclosure only to do accessory installations described in this manual or accessory manuals. Follow provided instructions carefully, to avoid electrical shocks. If unfamiliar with this type of work, seek assistance from an experienced individual, or have a professional technician do the task.

•Enlist the services of qualified personnel in the following cases:

a)The power supply or plug is damaged.

b)Objects have fallen or liquid has spilled into the transceiver.

c)The transceiver has been exposed to rain.

d)The transceiver is operating abnormally or performance has seriously degraded.

e)The transceiver has been dropped or the enclosure damaged.

iii