Kenwood TM-D700A, TM-D700E Programmable Memory PM, Programmable Information

PROGRAMMABLE MEMORY (PM)

Programmable Memory (PM) stores virtually all settings currently set on the transceiver. This transceiver provides 5 PM channels to store 5 sets of transceiver configurations. Later you can quickly recall one of these, depending on the operations in your mind or the operating environment.

PROGRAMMABLE INFORMATION

8The following settings can be separately stored for band A and B:

VFO frequency	VFO mode
Memory Recall mode	Call Channel mode
Offset direction	Offset frequency
Reverse ON	Automatic Simplex Check
Tone ON	Tone frequency
CTCSS ON	CTCSS frequency
DCS ON	DCS code
Upper frequency limit	Lower frequency limit
(for Programmable VFO)	(for Programmable VFO)
Frequency step size	FM/ AM mode
Wide/ narrow TX deviation 1

1TM-D700E only

The following settings are shared by both band A and B:

TX band	Control band
Transmit output power	Auto Band Change
Display Dimmer	Many of the menu selections
	under RADIO (1–) 1
Most of the menu selections	Most of the menu selections
under SSTV (2–) 1	under APRS (3–) 1
Most of the menu selections
under SKY COMMAND (4–) 1, 2

1The menu items listed below will not be stored:

•1–4–1, Auto PM Channel Store

•1–4–3, Memory Channel Lockout

•1–4–4, Memory channel name

•1–5–1, DTMF Number Store

•1–6–3, Time

•1–6–4, Date

•1–7–6, Repeater function

•1–9–5, COM port

•1–9–7, Reset

•1–A–3, Remote Control

•2–8, SSTV mode

•3–4, My position

•3–9, Status text

•4–4, Sky Command mode

2U.S.A./ Canada only

42