2Editing the Text
After completing the shift to cus- tomize mode, a flashing cursor shows the letter that can be edited by selecting a letter starting from “A”.
The letter selection method is described below. The time allowed for editing is limited to 60 sec.
1Press the PRESET 3 or 4 buttons to change the flashing letter by displaying other letters one by one. The letters will change con- tinuously if you press and hold the PRESET 3 or 4 button.
List of the letters and numbers that can be selected.
•Upper case letters (A to Z)
•Lower case letters (a to z)
•Numbers 0 to 9, spaces, sym- bols (!”# and so on)
2With the character that you want to select displayed, press the PRESET 6 button to select it.
After selecting the character, the cursor moves to the right so you can edit the next character. After you select the 16th character, the entire line starts flashing.
To delete a selected character, press the PRESET 5 button. After you delete a character the cursor shifts left so you can edit the pre- vious character. If you delete all of
the text, you can edit from the first character.
3After you are finished selecting the text for the line, press and hold down the PRESET 6 button.
The selected text string is regis- tered as the Opening Screen. The customize mode ends and the registered text string is displayed for 6 sec.
NOTICE
•If the unit leaves the cus- tomize mode during editing, repeat procedure 1 from Step 2.
•If the edit is registered with no new text, the original Opening Screen, “Scion” , will be restored.
3New Message Display
The next time the ACC is switched on, the text edited by the user will be displayed.
NOTICE
To avoid draining the battery, do not leave the car audio on longer than necessary when the engine is not running.
29