Alpine CDE-HD149BT owner manual Case of Difficulty

Page 47

Information

In Case of Difficulty

If you encounter a problem, turn the power off, then on again. If the unit is still not functioning normally, review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle’s ignition is off.

–If connected following instructions, the unit will not operate with the vehicle’s ignition off.

•Improper power lead (Red) and battery lead (Yellow) connections.

–Check power lead and battery lead connections.

•Blown fuse.

–Check the fuse of the unit; replace with the proper value if necessary.

•Internal micro-computer malfunctioned due to interference noise etc.

–Press the RESET switch with a ballpoint pen or other pointed article.

Radio

Unable to receive stations.

•No antenna or open connection in cable.

–Make sure the antenna is properly connected; replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

•You are in a weak signal area.

–Make sure the tuner is in the DX mode.

•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

–Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

•The antenna may not be the proper length.

–Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

Broadcast is noisy.

•The antenna is not the proper length.

–Extend the antenna fully; replace it if it is broken.

•The antenna is poorly grounded.

–Make sure the antenna is grounded properly at its mounting location.

CD

CD Player not functioning.

•Out of operating temperature range +50°C (+120°F) for CD.

– Allow the vehicle’s interior (or trunk) temperature to cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

–Allow enough time for the condensation to evaporate (about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

– Eject the CD and remove it.

•The CD is being improperly inserted.

–Make sure the CD is being inserted following instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

–Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

–Securely re-mount the unit.

•The disc is very dirty.

–Clean the disc.

•The disc has scratches.

–Change the disc.

•The pick-up lens is dirty.

–Do not use a commercially available lens cleaner disc. Consult your nearest Alpine dealer.

CD playback sound skips without vibration.

•The disc is dirty or scratched.

– Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only).

•Mechanical error.

–Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.

CD-R/CD-RW playback not possible.

•Close session (finalization) has not been performed.

– Perform finalization and attempt playback again.

MP3/WMA/AAC

MP3, WMA or AAC is not played back.

•Writing error occurred. The MP3/WMA/AAC format is not compatible.

–Make sure the MP3/WMA/AAC has been written in a supported format. Refer to “About MP3/WMA/AAC” on page 15, then rewrite in the format supported by this device.

Audio

The sound is not output from the speakers.

•There is no signal output from the internal amplifier.

–Power IC is switched to “ON” (refer to “Connecting to an External Amplifier” on page 18).

iPod

iPod does not play and no sound is output.

•The iPod has not been recognized.

–Reset this unit and the iPod. Refer to “Initial System Start-Up” on page 10. To reset the iPod, refer to the Owner’s Manual of the iPod.

Indication for CD Player

•No CD is inserted.

–Insert a CD.

•Although a disc is inserted, “No Disc” is displayed and the unit does not start to play or eject the disc.

–Remove the disc by following these steps: Press the  button again for at least 2 seconds.

If the disc still does not eject, consult your Alpine dealer.

47-EN

Page 46 Page 48
Image 47
Page 46 Page 48
Contents CDE-HD149BT Alpine Electronics France S.A.R.L Contents Setting the Bluetooth sound quality Playing MP3/WMA/AAC Data Play ModePairing a Bluetooth compatible device with Pairing a Bluetooth compatible device withoutReceiving and Tuning to an Alert Installation and ConnectionsFailure to do so may result in fire or electric shock Doing so may result in an accident, fire or electric shockIrregular Shaped Discs To customers using CD-R/CD-RWCD and you may not be able to play it again Unit can play back mp3, wma or m4a file extensions Protecting the USB connectorDetaching Accessory ListTurning Power On and Off Source SelectionInitial System Start-Up Adjusting VolumeLowering Volume Quickly Setting the Time and CalendarListening to Radio Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsStoring the tag information Frequency Search FunctionReceiving a Multicast Station Multicast Station SearchPress yOPEN About the Feature LogosPlayback 13-ENFolder/File Name Search Concerning MP3/WMA/AAC Repeat PlayX. Random Play Searching for CD Text15-EN About MP3/WMA/AAC16-EN VolumeDefeat TerminologySetting the Source Volume Level Audio SetupEqualizer Presets Factory’s EQ Adjusting the Parametric Equalizer Curve Parametric EQTurning Subwoofer ON/OFF Setting the Subwoofer PhaseSetting the Subwoofer System Setting the Media Xpander mode MX SetupAdjusting the Crossover Settings X-Over Setting the Time Correction Unit TCR ParameterAdjusting the Time Correction T.Correction Adjusting Spatial20-EN About Time CorrectionExample 1 Front Left Seat Example 2 All Seats200 Hz About the Crossover21-EN 20 HzPress kVIEW Displaying the Text22-EN 23-EN Option Menu SettingAbout the indication display About TextApplying TuneIt Adjusting the sound via Smartphone Setting item Make sure the unit is powered onPress and hold VSOURCE for at least 2 seconds Receiving Notification Ready on future updatePress r to return to the previous mode Facebook Notification FunctionDisplay Setting General SettingTuner Setting Application Setting APP IPod&USB Setting29-EN Setup Before UsingAbout Bluetooth Before Using Bluetooth FunctionPairing a Bluetooth Device from the unit Setting the Bluetooth Connection BluetoothSetting the Bluetooth Device Setting the Visible ModeChanging the Phone book List Order Setting the Bluetooth sound qualitySetting the Phone Book Update Hands-Free Phone Control Calling Bluetooth Audio Operation Selecting the desired Group Folder Recalling the Bluetooth Audio ModePausing Selecting the desired SongPress 1 or 2 to select the desired Folder Searching for a desired SongSelect Folder 36-EN37-EN Setting the iPod ControlConnecting an iPod/iPhone Press VSOURCE to switch to the iPod modeRefer to Random Play Shuffle M.I.X. on Press ENTER to activate the search selection modeDirect Search Function 38-EN39-EN Alphabet search functionRandom Play Shuffle M.I.X Change Playlist/Artist/Album/Genre/ Composer/EpisodeOnly alphanumeric characters Ascii can be displayed Listening to Pandora40-EN To skip to the next song, press Creating a New Station Thumbs FeedbackQuickMix Searching for a Desired StationSiriusXM Tuner operation Changing the DisplayReceiving Channels with the SiriusXM Tuner 42-ENManaging Artist and Song Alerts SiriusXM SettingSetting the Favorite Sports Team Alerts Setting the Parental Control44-EN Storing Channel PresetsTuning Channels using Presets Confirming the strength of the SiriusXM signalSearch Function Receiving and Tuning to an AlertUsing Jump Memory and Jump Recall function 46-EN Replay FunctionParental Lock Function Storing iTunes Tagging informationCase of Difficulty SiriusXM Advisory Messages Indication for Flash Memory Error-01Indication for iPod Mode Bluetooth modeYou have not created any personalized Pandora Stations Indication for Pandora Mode No Pandora49-EN Buffer for Replay is full50-EN Specifications51-EN Installation and ConnectionsPull the unit out, keeping it unlocked as you do so InstallationRemoval 52-ENRemove Flash Memory Mounting the MicrophoneIPod/iPhone Connection sold separately Remove the iPod/iPhone54-EN Connections55-EN  You must supply proof of your purchase of the product This Warranty does not cover the followingQue pueda causar su operación no deseada USA/CanadaAuthority to operate the equipment México

CDE-HD149BT specifications

The Alpine CDE-HD149BT is an advanced car stereo receiver that seamlessly integrates modern technology with superior audio quality, designed for music enthusiasts who demand both functionality and aesthetics. With its sleek design and user-friendly interface, this model is a great addition to any vehicle.

One of the standout features of the CDE-HD149BT is its extensive compatibility with various media formats. It supports CDs, DVDs, USB drives, and even Bluetooth connectivity, allowing users to enjoy their favorite tracks from different sources. Its built-in Bluetooth allows for hands-free calling and audio streaming, ensuring that drivers can stay connected while keeping their focus on the road.

The receiver also includes a built-in HD Radio tuner, which provides improved sound quality and access to hundreds of additional radio stations. This feature allows users to experience crystal-clear audio without the interference typically associated with traditional AM/FM broadcasts. For those who crave custom sound settings, the CDE-HD149BT offers a 9-band graphic equalizer, allowing users to adjust frequencies to their liking for a personalized listening experience.

Another notable technology in the CDE-HD149BT is its compatibility with Alpine's "iPersonalize" portal, enabling users to tailor their sound system's performance according to their vehicle's acoustics. This feature is particularly useful for audiophiles looking to optimize their sound environment.

The CDE-HD149BT features a vibrant display that presents information clearly, making it easy to navigate through playlists, incoming calls, and settings. The unit's intuitive controls, including a responsive rotary dial, enhance the overall user experience, making it simple to adjust volume or switch tracks without distraction.

Moreover, the CDE-HD149BT comes equipped with multiple preamp outputs, allowing for easy connectivity to external amplifiers and subwoofers. This ensures that users can expand their audio system to achieve deeper bass and richer sound quality.

In conclusion, the Alpine CDE-HD149BT is a versatile car stereo that combines high-fidelity audio performance with modern connectivity options. With its user-friendly features, intelligent design, and a range of customization options, it's an ideal choice for those seeking a premium in-car audio experience. Whether commuting or embarking on a road trip, this receiver offers the tools you need to enjoy your music to the fullest.
Top Page Image Contents