Alpine Guide for Installing and Removing Your CD Player
Page 52

Installation

Air ventilation hole

Rear of the Unit

Caution

Do not block the unit’s fan or heat sink, thus preventing air circulation. If blocked, heat will accumulate inside the unit and may cause a fire.

CAUTION

When you install this unit in your car, do not remove the detachable front panel.

If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.

The main unit must be mounted within 35 degrees of the horizontal plane, back to front.

Detachable Front

Panel

Less than 35°

1Remove the mounting sleeve from the main unit (Refer to “Removal” on page 52).

Mounting Sleeve (Included)

Dashboard

Pressure Plates*

This unit

*If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem.

2Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot.

Connect each input lead coming from an amplifier to the corresponding output lead coming from the left rear of the CDE-HD149BT. Connect all other leads of the CDE-HD149BT according to details described in the CONNECTIONS section.

Hex Nut (M5)

Screw

*

Bolt Stud

Metal

Mounting

Strap

This unit

Note

•For the screw marked “*”, use an appropriate screw for the chosen mounting location.

3Slide the CDE-HD149BT into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel.

Removal

1Remove the detachable front panel.

2Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.

This unit

Bracket keys (Included)

3Pull the unit out, keeping it unlocked as you do so.

JAPANESE CAR

 

 

 

 

 

 

 

 

Front Frame

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This unit

 

 

 

 

Screws (M5 × 8)

 

 

 

 

(Included)

 

 

 

 

 

 

 

 

 

Mounting Bracket

52-EN

Page 51 Page 53
Image 52
Page 51 Page 53
Contents CDE-HD149BT Alpine Electronics France S.A.R.L Contents Playing MP3/WMA/AAC Data Play Mode Pairing a Bluetooth compatible device withPairing a Bluetooth compatible device without Setting the Bluetooth sound qualityInstallation and Connections Receiving and Tuning to an AlertDoing so may result in an accident, fire or electric shock Failure to do so may result in fire or electric shockCD and you may not be able to play it again To customers using CD-R/CD-RWIrregular Shaped Discs Protecting the USB connector Unit can play back mp3, wma or m4a file extensionsAccessory List Turning Power On and OffSource Selection DetachingAdjusting Volume Lowering Volume QuicklySetting the Time and Calendar Initial System Start-UpPresetting Stations Manually Presetting Stations AutomaticallyTuning to Preset Stations Listening to RadioFrequency Search Function Receiving a Multicast StationMulticast Station Search Storing the tag informationAbout the Feature Logos Playback13-EN Press yOPENRepeat Play X. Random PlaySearching for CD Text Folder/File Name Search Concerning MP3/WMA/AACAbout MP3/WMA/AAC 15-ENVolume DefeatTerminology 16-ENAudio Setup Equalizer Presets Factory’s EQAdjusting the Parametric Equalizer Curve Parametric EQ Setting the Source Volume LevelSetting the Subwoofer Phase Setting the Subwoofer SystemSetting the Media Xpander mode MX Setup Turning Subwoofer ON/OFFSetting the Time Correction Unit TCR Parameter Adjusting the Time Correction T.CorrectionAdjusting Spatial Adjusting the Crossover Settings X-OverAbout Time Correction Example 1 Front Left SeatExample 2 All Seats 20-ENAbout the Crossover 21-EN20 Hz 200 Hz22-EN Displaying the TextPress kVIEW Option Menu Setting About the indication displayAbout Text 23-ENAdjusting the sound via Smartphone  Setting itemMake sure the unit is powered on Applying TuneItReceiving Notification Ready on future update Press r to return to the previous modeFacebook Notification Function Press and hold VSOURCE for at least 2 secondsGeneral Setting Display SettingTuner Setting IPod&USB Setting Application Setting APPSetup Before Using About BluetoothBefore Using Bluetooth Function 29-ENSetting the Bluetooth Connection Bluetooth Setting the Bluetooth DeviceSetting the Visible Mode Pairing a Bluetooth Device from the unitSetting the Phone Book Update Setting the Bluetooth sound qualityChanging the Phone book List Order Hands-Free Phone Control Calling Bluetooth Audio Operation Recalling the Bluetooth Audio Mode PausingSelecting the desired Song Selecting the desired Group FolderSearching for a desired Song Select Folder36-EN Press 1 or 2 to select the desired FolderSetting the iPod Control Connecting an iPod/iPhonePress VSOURCE to switch to the iPod mode 37-ENPress ENTER to activate the search selection mode Direct Search Function38-EN Refer to Random Play Shuffle M.I.X. onAlphabet search function Random Play Shuffle M.I.XChange Playlist/Artist/Album/Genre/ Composer/Episode 39-ENListening to Pandora 40-ENTo skip to the next song, press  Only alphanumeric characters Ascii can be displayedThumbs Feedback QuickMixSearching for a Desired Station Creating a New StationChanging the Display Receiving Channels with the SiriusXM Tuner42-EN SiriusXM Tuner operationSiriusXM Setting Setting the Favorite Sports Team AlertsSetting the Parental Control Managing Artist and Song AlertsStoring Channel Presets Tuning Channels using PresetsConfirming the strength of the SiriusXM signal 44-ENUsing Jump Memory and Jump Recall function Receiving and Tuning to an AlertSearch Function Replay Function Parental Lock FunctionStoring iTunes Tagging information 46-ENCase of Difficulty Indication for Flash Memory Error-01 Indication for iPod ModeBluetooth mode SiriusXM Advisory MessagesIndication for Pandora Mode No Pandora 49-ENBuffer for Replay is full You have not created any personalized Pandora StationsSpecifications 50-ENInstallation and Connections 51-ENInstallation Removal52-EN Pull the unit out, keeping it unlocked as you do soMounting the Microphone IPod/iPhone Connection sold separatelyRemove the iPod/iPhone Remove Flash MemoryConnections 54-EN55-EN This Warranty does not cover the following  You must supply proof of your purchase of the productUSA/Canada Authority to operate the equipmentMéxico Que pueda causar su operación no deseada

CDE-HD149BT specifications

The Alpine CDE-HD149BT is an advanced car stereo receiver that seamlessly integrates modern technology with superior audio quality, designed for music enthusiasts who demand both functionality and aesthetics. With its sleek design and user-friendly interface, this model is a great addition to any vehicle.

One of the standout features of the CDE-HD149BT is its extensive compatibility with various media formats. It supports CDs, DVDs, USB drives, and even Bluetooth connectivity, allowing users to enjoy their favorite tracks from different sources. Its built-in Bluetooth allows for hands-free calling and audio streaming, ensuring that drivers can stay connected while keeping their focus on the road.

The receiver also includes a built-in HD Radio tuner, which provides improved sound quality and access to hundreds of additional radio stations. This feature allows users to experience crystal-clear audio without the interference typically associated with traditional AM/FM broadcasts. For those who crave custom sound settings, the CDE-HD149BT offers a 9-band graphic equalizer, allowing users to adjust frequencies to their liking for a personalized listening experience.

Another notable technology in the CDE-HD149BT is its compatibility with Alpine's "iPersonalize" portal, enabling users to tailor their sound system's performance according to their vehicle's acoustics. This feature is particularly useful for audiophiles looking to optimize their sound environment.

The CDE-HD149BT features a vibrant display that presents information clearly, making it easy to navigate through playlists, incoming calls, and settings. The unit's intuitive controls, including a responsive rotary dial, enhance the overall user experience, making it simple to adjust volume or switch tracks without distraction.

Moreover, the CDE-HD149BT comes equipped with multiple preamp outputs, allowing for easy connectivity to external amplifiers and subwoofers. This ensures that users can expand their audio system to achieve deeper bass and richer sound quality.

In conclusion, the Alpine CDE-HD149BT is a versatile car stereo that combines high-fidelity audio performance with modern connectivity options. With its user-friendly features, intelligent design, and a range of customization options, it's an ideal choice for those seeking a premium in-car audio experience. Whether commuting or embarking on a road trip, this receiver offers the tools you need to enjoy your music to the fullest.
Top Page Image Contents