Alpine CDE-HD149BT: Important Installation and Connection Guidelines
Page 51

Installation and Connections

Before installing or connecting the unit, please read the following and refer to “Operating Instructions” on page 6 for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDE-HD149BT. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-HD149BT to the fuse box, make sure the fuse for the intended circuit of the CDE-HD149BT has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

•The CDE-HD149BT uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number or the

engraved serial number is located on the bottom of the unit.

 

SERIAL NUMBER: [

]

INSTALLATION DATE: [

]

INSTALLATION TECHNICIAN: [

]

PLACE OF PURCHASE: [

]

51-EN

Page 50 Page 52
Image 51
Page 50 Page 52
Contents CDE-HD149BT Alpine Electronics France S.A.R.L Contents Setting the Bluetooth sound quality Playing MP3/WMA/AAC Data Play ModePairing a Bluetooth compatible device with Pairing a Bluetooth compatible device withoutReceiving and Tuning to an Alert Installation and ConnectionsFailure to do so may result in fire or electric shock Doing so may result in an accident, fire or electric shockTo customers using CD-R/CD-RW CD and you may not be able to play it againIrregular Shaped Discs Unit can play back mp3, wma or m4a file extensions Protecting the USB connectorDetaching Accessory ListTurning Power On and Off Source SelectionInitial System Start-Up Adjusting VolumeLowering Volume Quickly Setting the Time and CalendarListening to Radio Presetting Stations ManuallyPresetting Stations Automatically Tuning to Preset StationsStoring the tag information Frequency Search FunctionReceiving a Multicast Station Multicast Station SearchPress yOPEN About the Feature LogosPlayback 13-ENFolder/File Name Search Concerning MP3/WMA/AAC Repeat PlayX. Random Play Searching for CD Text15-EN About MP3/WMA/AAC16-EN VolumeDefeat TerminologySetting the Source Volume Level Audio SetupEqualizer Presets Factory’s EQ Adjusting the Parametric Equalizer Curve Parametric EQTurning Subwoofer ON/OFF Setting the Subwoofer PhaseSetting the Subwoofer System Setting the Media Xpander mode MX SetupAdjusting the Crossover Settings X-Over Setting the Time Correction Unit TCR ParameterAdjusting the Time Correction T.Correction Adjusting Spatial20-EN About Time CorrectionExample 1 Front Left Seat Example 2 All Seats200 Hz About the Crossover21-EN 20 HzDisplaying the Text 22-ENPress kVIEW 23-EN Option Menu SettingAbout the indication display About TextApplying TuneIt Adjusting the sound via Smartphone Setting item Make sure the unit is powered onPress and hold VSOURCE for at least 2 seconds Receiving Notification Ready on future updatePress r to return to the previous mode Facebook Notification FunctionDisplay Setting General SettingTuner Setting Application Setting APP IPod&USB Setting29-EN Setup Before UsingAbout Bluetooth Before Using Bluetooth FunctionPairing a Bluetooth Device from the unit Setting the Bluetooth Connection BluetoothSetting the Bluetooth Device Setting the Visible ModeSetting the Bluetooth sound quality Setting the Phone Book UpdateChanging the Phone book List Order Hands-Free Phone Control Calling Bluetooth Audio Operation Selecting the desired Group Folder Recalling the Bluetooth Audio ModePausing Selecting the desired SongPress 1 or 2 to select the desired Folder Searching for a desired SongSelect Folder 36-EN37-EN Setting the iPod ControlConnecting an iPod/iPhone Press VSOURCE to switch to the iPod modeRefer to Random Play Shuffle M.I.X. on Press ENTER to activate the search selection modeDirect Search Function 38-EN39-EN Alphabet search functionRandom Play Shuffle M.I.X Change Playlist/Artist/Album/Genre/ Composer/EpisodeOnly alphanumeric characters Ascii can be displayed Listening to Pandora40-EN To skip to the next song, press Creating a New Station Thumbs FeedbackQuickMix Searching for a Desired StationSiriusXM Tuner operation Changing the DisplayReceiving Channels with the SiriusXM Tuner 42-ENManaging Artist and Song Alerts SiriusXM SettingSetting the Favorite Sports Team Alerts Setting the Parental Control44-EN Storing Channel PresetsTuning Channels using Presets Confirming the strength of the SiriusXM signalReceiving and Tuning to an Alert Using Jump Memory and Jump Recall functionSearch Function 46-EN Replay FunctionParental Lock Function Storing iTunes Tagging informationCase of Difficulty SiriusXM Advisory Messages Indication for Flash Memory Error-01Indication for iPod Mode Bluetooth modeYou have not created any personalized Pandora Stations Indication for Pandora Mode No Pandora49-EN Buffer for Replay is full50-EN Specifications51-EN Installation and ConnectionsPull the unit out, keeping it unlocked as you do so InstallationRemoval 52-ENRemove Flash Memory Mounting the MicrophoneIPod/iPhone Connection sold separately Remove the iPod/iPhone54-EN Connections55-EN  You must supply proof of your purchase of the product This Warranty does not cover the followingQue pueda causar su operación no deseada USA/CanadaAuthority to operate the equipment México

CDE-HD149BT specifications

The Alpine CDE-HD149BT is an advanced car stereo receiver that seamlessly integrates modern technology with superior audio quality, designed for music enthusiasts who demand both functionality and aesthetics. With its sleek design and user-friendly interface, this model is a great addition to any vehicle.

One of the standout features of the CDE-HD149BT is its extensive compatibility with various media formats. It supports CDs, DVDs, USB drives, and even Bluetooth connectivity, allowing users to enjoy their favorite tracks from different sources. Its built-in Bluetooth allows for hands-free calling and audio streaming, ensuring that drivers can stay connected while keeping their focus on the road.

The receiver also includes a built-in HD Radio tuner, which provides improved sound quality and access to hundreds of additional radio stations. This feature allows users to experience crystal-clear audio without the interference typically associated with traditional AM/FM broadcasts. For those who crave custom sound settings, the CDE-HD149BT offers a 9-band graphic equalizer, allowing users to adjust frequencies to their liking for a personalized listening experience.

Another notable technology in the CDE-HD149BT is its compatibility with Alpine's "iPersonalize" portal, enabling users to tailor their sound system's performance according to their vehicle's acoustics. This feature is particularly useful for audiophiles looking to optimize their sound environment.

The CDE-HD149BT features a vibrant display that presents information clearly, making it easy to navigate through playlists, incoming calls, and settings. The unit's intuitive controls, including a responsive rotary dial, enhance the overall user experience, making it simple to adjust volume or switch tracks without distraction.

Moreover, the CDE-HD149BT comes equipped with multiple preamp outputs, allowing for easy connectivity to external amplifiers and subwoofers. This ensures that users can expand their audio system to achieve deeper bass and richer sound quality.

In conclusion, the Alpine CDE-HD149BT is a versatile car stereo that combines high-fidelity audio performance with modern connectivity options. With its user-friendly features, intelligent design, and a range of customization options, it's an ideal choice for those seeking a premium in-car audio experience. Whether commuting or embarking on a road trip, this receiver offers the tools you need to enjoy your music to the fullest.
Top Page Image Contents